Abstract:<p>Improving sludge drying efficiency is of tremendous importance for public health, subsequent treatment, and comprehensive utilization. The interfacial thermal resistance between sludge and hot wall greatly limits the conductive drying performance. This study employed mechanical compression to decrease the interfacial thermal resistance. The drying kinetics and interfacial heat transfer behavior were investigated at mechanical loads of 25 to 200 kPa, temperatures of 120 to 210 °C, and sludge thicknesses of 1.0 to 3.0 mm, and were compared to those in the conventional drying process without mechanical load. The increase of temperature and mechanical load and the decrease of thickness improved drying rates. The drying experienced one warm-up period and two falling rate periods. The breakthrough of interfacial vapor film was responsible for the rapid rise in drying rates initially. At the thickness of 3.0 mm, 210 °C, and 100 kPa, the effective moisture diffusivity was increased by 2.5 times, and the apparent activation energy was reduced by 34% compared to the traditional process in the first falling rate period, implying that mechanical compression facilitated moisture migration and bound water desorption. The effective moisture diffusivity in the first falling rate period was increased by 35% compared to the diffusivity in the second falling rate period because of the pressure-driven flow. The decrease in drying rates was due to the transformation from the pressure-driven flow to vapor diffusion-limited flow in the first falling rate period. Additionally, this study provided essential information on developing a new sludge treatment method and establishing the drying model.</p>

Comparative Study on Drying Characteristics of Sewage Sludge in Two Kinds of Indirect Heat Drying Equipment

Research on Sludge Drying Characteristics in a Double-Axis Paddle Dryer by Coupling Markov Chain and Penetration Theory

Process and mechanism of indirect thermal drying of sewage sludge

Experimental and Theoretical Research on Agitated Contact Drying of Sewage Sludge in a Continuous Paddle Dryer

Experimental research on thermal drying and combustion characteristics of sludge

Two-stage low-temperature drying of sludge:Mechanisms and vapor/heat balance

Experimental Study on Thermal Hydrolysis and Dewatering Characteristics of Mechanically Dewatered Sewage Sludge

Experimental research on indirect thermal drying process of sewage sludge

Drying characteristics of sewage sludge pre-conditioned by CaO and sawdust under low-temperature drying conditions

Experiment Research on Characteristics of Vacuum Torrefaction Dewater Sewage Sludge

Coupling Heat Pump and Vacuum Drying Technology for Urban Sludge Processing

Difference and cause analysis of drying characteristics of different shapes sludge

Experimental and Theoretical Study of Agitated Contact Drying of Sewage Sludge under Partial Vacuum Conditions

Enhancement of conductive drying of sewage sludge with mechanical compression: Drying kinetics, and interfacial heat transfer behavior

Mechanical compression assisted conductive drying of thin-film dewatered sewage sludge: Process performance, heat and mass transfer behavior

Application Progress and Technical Mains of Thermal Sludge Drying Processes at Home and Abroad

Emission Characteristics and Formation Mechanism Analysis of Exhaust during Sludge Thermal Drying Process

Measurement and Simulation of the Contact Drying of Sewage Sludge in a Nara-type Paddle Dryer

Feasibility analysis on drying and incineration of sewage sludge from a wastewater treatment plant

Operating characteristics of sludge heat pump dryer and influencing factors of performance: A field experiment in an electroplating factory

Experimental study of sludge disposal in a large coal-fired power plant