Dioxin suppression gases emission characteristics during particular sludge drying process
Tong CHEN,Ming-xiu ZHAN,Xiao-qing LIN,Xiao-dong LI,Sheng-yong LU,Jian-hua YAN
DOI: https://doi.org/10.3785/j.issn.1008-973X.2015.02.019
2015-01-01
Abstract:In order to study the emission characteristic of dioxin suppression gases ,including SO2 ,N H3 , HCN ,during sludge drying process ,Gasmet was used to measure the concentration of these gases and other normal pollutants ,including CO and NO2 ,when sludge was dried in the small‐scale tube furnace . Moreover ,the influences of drying temperature ,type of sludge and drying atmosphere on the emission characteristics of dioxin suppression gases were also studied .The results show that the emission rates of SO2 ,NH3 and HCN were about 680 ,1 570 ,110 mg/(m3 · s) when sludge (2 g)was heated for 50 min under N2 .Furthermore ,the results also reveal that the higher drying temperature was set ,the shorter the emission time lasted;More NH3 generate under N2 atmosphere ,but turning to SO2 under the simulated flue gas atmosphere;high N or S content of sludge generates moredioxin suppression gases in the some cases .Considering the emission characteristics of NH3 and HCN ,θ = 300 ~ 350 ℃ was chosen as the proper drying temperature .It’s good for dioxin suppression gases emission by intermittent heating ,and it’s needed to pay attention to the reverse arrangement of sludge conveying and flue gas flowing in the industrial application to generate continuous suppression gases .We believe it is also available in a large‐scale application after parameters modification .