Abstract:Based on the analysis of the degree of cure and temperature dependent viscoelastic constitutive model of composite,the dimensionless parameters defined as Dem were proposed to characterize the viscoelasticity of composite in this paper.The parameters Dem can comprehensively reflect the effects of the degree of cure and temperature on the viscoelasticity of a composite during cure.When all of the values of Dem are higher than 10-,the composite matrix is in a flow state.When all of the values of Dem are less than 10-2,the composite is in an elastic state.Only when one or more Dem lie between 10-2 and 10-2,the composite is in viscoelastic state.The behavior of the AS4 fiber/3501-6 polymer matrix composite was used as example,the development of the viscoelasticity of the composite was analyzed according to the evolution of the parameters Dem during the typical curing cycle.The result shows that the gelation time determined by the parameters Dem is consistent with that obtained by experimental tests.According to the effect of viscoelasticity of composite on the accumulation of residual stress,the analysis procedure on the residual stress was divided into the flow stage and the viscoelasticity stage,and the cure state dependent viscoelastic constitutive models were put forward.The proposed models were verified by comparing their predictions with those of the original constitutive model.The results show that the residual stresses predicted by the proposed models are consistent with those predicted by the original model,but the computing time and storage space required by the proposed models are greatly reduced.

Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner During Curing

A Thermo-Viscoelastic Analytical Model for Residual Stresses and Spring-in Angles of Multilayered Thin-Walled Curved Composite Parts

An Improved Analytical Solution For Process-Induced Residual Stresses And Deformations In Flat Composite Laminates Considering Thermo-Viscoelastic Effects

A New Path-Dependent Constitutive Model Predicting Cure-Induced Distortions in Composite Structures

Process-induced Residual Stress of Variable-Stiffness Composite Laminates During Cure

Analysis on the process dependent viscoelastic properties and residual stresses of composites during cure

Study on Cure-Induced Residual Stresses and Spring-in Deformation of L-shaped Composite Laminates Using a Simplified Constitutive Model Considering Stress Relaxation

Process-Induced Deformation of L-Shaped Laminates: Analysis of Tool–Part Interaction

Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process

Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models

A review of numerical simulation of cure-induced distortions andresidual stresses in thermoset composites

A Model on the Curved Shapes of Unsymmetric Laminates Including Tool-Part Interaction

Evolution of Curing Residual Stresses in Composite Using Multi-Scale Method

Mesoscopic Simulation on Curing Deformation and Residual Stresses of 3D Braided Composites

A Micromechanical Debonding Analysis of Fiber-Reinforced Composites Due to Curing Residual Stress

A Comparison of Curing Process-Induced Residual Stresses and Cure Shrinkage in Micro-Scale Composite Structures with Different Constitutive Laws

Comparative Study on the Effect of Cure Parameters on Residual Deformation for Thermoset Composite Laminates

Analysis of Cure-Induced Deformation of Asymmetric C-shaped Composite Parts

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

Finite Element Analysis for Curing Process of Composite Laminates

Process-Induced Stress and Deformation of Variable-Stiffness Composite Cylinders During Curing