Abstract:An integrated curing simulation methodology considering resin flow and compaction. Computational methods provide effective tools for the prediction of the curing behavior of composites, especially for large‐scale complex composite structures. The flow‐compaction analysis during curing receives insufficient attention in current studies. In this work, an integrated framework considering the heat transfer, the cross‐linking reaction, the flow and compaction, and the stress–strain module is established. A comprehensive resin flow termination criterion is proposed. L‐shaped composites with a stacking layer of [45/90/−45/0]s were fabricated, and the good agreement between the experimentally measured and the numerically predicted contour data validated the current model. Compared with Hubert's model, the prediction accuracy of the thickness and fiber volume content increases by 4.24% and 3.92%, respectively. Correlation analysis between the fiber volume ratio predicted by numerical methods and experimental results (94% for this method, −41% for Hubert's model) demonstrates the well‐capture of nonuniform fiber distribution in curved composites for the current strategy. The overall framework provides an accurate and promising tool for the prediction of the curing behavior of complex composite components. Highlights An integrated numerical methodology is proposed considering the resin flow and compaction. The viscosity‐temperature coupled feature of resin is considered in the permeability coefficients. A comprehensive resin flow termination criterion is proposed for an accurate prediction. The resin content, thickness, and spring‐in angle of L‐shaped laminates are characterized. The good correlation between the experimental and numerical results validates this method. Compared with the model proposed by Hubert, the prediction accuracy improves.

A Thermo-Viscoelastic Analytical Model for Residual Stresses and Spring-in Angles of Multilayered Thin-Walled Curved Composite Parts

An Improved Analytical Solution For Process-Induced Residual Stresses And Deformations In Flat Composite Laminates Considering Thermo-Viscoelastic Effects

A Model on the Curved Shapes of Unsymmetric Laminates Including Tool-Part Interaction

Thermo-Chemo-Mechanical Modeling of Residual Stress in Unidirectional Carbon Fiber-Reinforced Polymers during Manufacture

Cure-Dependent Viscoelastic Analysis on the Residual Stresses and Distortion Created in Composite Corner During Curing

Analytical Model for the Winding Process-Induced Residual Stresses of the Multilayered Filament Wound Cylindrical Composite Parts

Process-Induced Deformation of L-Shaped Laminates: Analysis of Tool–Part Interaction

Process-induced Residual Stress of Variable-Stiffness Composite Laminates During Cure

Process Modelling of Curing Process-Induced Internal Stress and Deformation of Composite Laminate Structure with Elastic and Viscoelastic Models

Thermo-viscoelastic Analysis of the Integrated T-shaped Composite Structures

Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process

Study on Cure-Induced Residual Stresses and Spring-in Deformation of L-shaped Composite Laminates Using a Simplified Constitutive Model Considering Stress Relaxation

Design Optimization for Filament Wound Cylindrical Composite Internal Pressure Vessels Considering Process-Induced Residual Stresses

Multiscale Thermo-Mechanical Analysis of Cure-Induced Deformation in Composite Laminates Using Direct FE2

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Three-Dimensional Thermo–Chemo–Mechanical Coupled Curing Analysis for the Filament Wound Composite Shell

Modeling on the Effect of Automated Fiber Placement Induced Gaps in Curved Composite Laminates

A new analytical solution for spring-in of curved composite parts

Viscosity‐coupled curing simulation model for L‐shaped composites considering flow and compaction

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect

Comparative Study on the Effect of Cure Parameters on Residual Deformation for Thermoset Composite Laminates