Abstract:A two-dimensional model for the simulation of solidification microstructure in multi-component alloy systems has been developed. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (S/L) interface. The dynamics of the interface is controlled by temperature, solute diffusion and Gibbs-Thomson effects. The diffusion equation for the temperature with release of latent heat on the S/L interface is valid in the entire domain, and the solute diffusion equation is also used in the entire domain through potential functions. Two methods are proposed to calculate the increment of the solid fraction. The first method is based on the level rule method similar to the one proposed by Jacot et al., but without the assumption of uniform temperature on the scale of the calculation domain. The second one is based on the calculation of the S/L interface velocity, which generalizes the results of Nastac and Beltran-Sanchez et al. for two-component alloy systems. If the concentration of one of the solutes tends to zero, both proposed methods reduce to the methods in Jacot et al. and Beltran-Sanchez et al. for two component alloy systems. Mesh independency is achieved by both methods and the dendritic morphologies obtained are the same if the mesh is fine enough. However, the morphologies of equiaxed dendrites calculated by using the interface velocity tends to the stable form more easily than those calculated using the level rule method as the mesh size is refined. For two-component alloy systems, the predictions of LGK theory for the steady-state tip velocity are compared with simulated values as a function of melt undercooling, which shows good agreement at very large range of undercooling. The simulated primary arm spacing in directional solidification is compared with experimental results for Fe-Si-Mg alloys and good agreement is also observed. It is noted that both methods for computing the solid fraction can be used for any multi-component alloy systems provided that the thermodynamic data are given

Cellular Automaton Simulation for the Oxidation of Binary Alloys

A randomwalk-cellular automaton simulation of internal oxidation and its transition to external oxidation

ICOPE-15-C096 Cellular Automata Simulation for High Temperature Oxidation and Sulfuration of Water Wall Materials

A randomwalk-cellular automaton model of precipitation of internal oxides

Modeling Oxidation of AlCoCrFeNi High-Entropy Alloy Using Stochastic Cellular Automata

Simulation of Metal Corrosion Layer Growth Behavior under High Temperature by Cellular Automaton Method

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

A New Simulation Model for Oxidation of Co on the Catalyst'S Surface

Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy

Improved cellular automata modeling of corrosion/oxidation mechanism of stainless steel in LBE

High-temperature Oxidation of Pure Al: Kinetic Modeling Supported by Experimental Characterization

Modeling of Oxidation Kinetics of Y-Doped Fe–Cr–Al Alloys

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Chemomechanical Finite Element Analysis for Surface Oxidation of Aluminum Alloy

Cellular Automaton Modeling of Nitridation and Nitride Precipitation in Alloy Steels

Simulations on the oxidation of Al-Mg alloy nanoparticles using the ReaxFF reactive force field

Modeling Selective Intergranular Oxidation of Binary Alloys

A ReaxFF molecular dynamics study of the micro-dynamic oxidation behavior of Ni-Al alloys

Exploring the oxidation mechanism of Ni3Al based alloy by ReaxFF molecular dynamics simulation

Data Analytics Approach to Predict High-Temperature Cyclic Oxidation Kinetics of NiCr-based Alloys

Visualizing ion transport mechanisms through oxide scales grown on mixed nickel- and cobalt-base model alloys at 900 °C using FIB-SIMS techniques