Coupling thermal and catalytic cracking of polymer wastes to boost carbon nanotubes production: Effects of HZSM-5 zeolites
Huimin Qiao,Xu Hou,Hao Zhou,Chenggong Song,Li Yin,Jing Huang,Enxian Yuan,Tingting Cui
DOI: https://doi.org/10.1016/j.fuel.2023.128821
IF: 7.4
2023-06-12
Fuel
Abstract:The efficient synthesis of carbon nanotubes from polymer wastes has been considered one promising technology for the effective management of current environment crisis. In the two-stage reaction system, HZSM-5 zeolites were introduced into the two-stage reaction system between the upper and lower stages, which was expected to upgrade the pyrolysis gas from polymer wastes and boost the growth of carbon nanotubes on Fe-Al 2 O 3 catalyst. The physicochemical properties of HZSM-5 zeolites, Fe-Al 2 O 3 catalyst and the as-obtained carbon materials were systematically characterized by XRD, N 2 physisorption, 27 Al MAS NMR, NH 3 -TPD, H 2 -TPR, SEM, TEM, TG-DSC and Raman. It was found that the presence of HZSM-5 zeolites increased the length and yield, and narrowed the diameter of carbon nanotubes. In the absence of HZSM-5 zeolites, the yield of carbon nanotubes was 34 mg/g with an average diameter of 19 nm. The introduction of HZSM-5 and meso -HZSM-5 increased the yield of carbon nanotubes to 109 mg/g and 90 mg/g, and recduced the average diameter to 15 nm and 13 nm, respectively. The improvement of HZSM-5 zeolites on the synthesis of carbon nanotubes was observed for divrese polymer wastes inlcluding LDPE, HDPE and PP. It was attributed to the unique acidity and porosity of HZSM-5 zeolites, which enhanced the secondary cracking of the pyrolysis gas and the formation of light hydrocarbons.
energy & fuels,engineering, chemical