Abstract:As the global plastic waste crisis intensifies, innovative and sustainable solutions are urgently needed. This study evaluated waste-derived metal-incorporated activated carbon (AC) catalysts for the pyrolysis of mixed plastic waste to generate value-added products, focusing on product yield distribution, composition, hydrogen, and carbon nanotube (CNT) formation. Pyrolysis-catalysis experiments were conducted using a two-stage fixed-bed reactor, wherein the temperature was maintained at 500 °C in first stage (pyrolysis) and varied (500, 600, and 700 °C) in the second stage (catalysis). The tested ACs were incorporated with nickel (Ni-AC), iron (Fe-AC), and zinc (Zn-AC) to assess the impact of metal particles distributed on the carbonaceous support in the second stage. The results from the ACs were compared to those obtained using zeolite (H-ZSM-5), Raw-AC, and non-catalytic runs. The Ni-AC and Fe-AC demonstrated superior catalytic activity, with Ni-AC being more efficient in producing hydrogen (4.24 wt%) and CNTs (34.5 wt%) with diameters of approximately 30 nm, and Fe-AC leading to higher gas yields (68.8 wt%) and CNTs (12.4 wt%) of around 60 nm. In contrast, Zn-AC and Raw-AC presented limited effectiveness, although Raw-AC moderately outperformed Zn-AC with enhanced gas yields and reduced oil/wax yields. The zeolite H-ZSM-5 exhibited the highest gas yields (78 wt%), converting heavy fractions into lighter molecules, notably the monomers ethylene and propylene. These findings provide valuable insights into catalyst selection and optimization for plastic waste pyrolysis processes, with H-ZSM-5 being the most effective catalyst for monomer recovery, and Ni-AC and Fe-AC demonstrating promising results.

Hydrolysis of Waste Monomer Casting Nylon Catalyzed by Solid Acids

Catalyzed Hydrolysis of Waste Mc Nylon Using Zeolites in Subcritical Water

Enhanced Hydrothermal Conversion of Caprolactam from Waste Monomer Casting Polyamide over H-Beta Zeolite and Its Mechanism

Hydrolytic degradation of monomer casting nylon in subcritical water

Rapid Chemical Recycling of Waste Polyester Plastics Catalyzed by Recyclable Catalyst

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Electrocatalytic Conversion of Waste Polyamide‐66 Hydrolysates into High‐added‐value Adiponitrile and Hydrogen Fuel

Chemical Recycling of Waste Polyurethane Foams: Efficient Acidolysis under the Catalysis of Zinc Acetate

Micelles Cascade Assembly to Tandem Porous Catalyst for Waste Plastics Upcycling

Catalytic Hydrolysis of Waste Nylon 6 to Produce Ɛ-Caprolactam in Sub-Critical Water

Electrochemical Upgrading of Waste Polylactic Acid Plastic for the Coproduction of C2 Chemicals and Green Hydrogen

The Catalytic Mechanism and Limiting Factor of Polyamide Hydrolysis for Chemical Recycling: the Classic Hydrolysis of Polyamide 4

Catalytic pyrolysis of plastic waste using metal-incorporated activated carbons for monomer recovery and carbon nanotube synthesis

Hydroborative Depolymerization of Polyesters and Polycarbonates to Diols Catalyzed by Heterogeneous Lanthanum Materials La(CH2C6H4NMe2- o)3@SBA-15

Subcritical Water Hydrolysis of Nylon 6 Extract Concentrate

Electrocatalytic Reforming of Polylactic Acid Plastic Hydrolysate over Dynamically Formed γ-NiOOH

Surface-Activated Mechano-Catalysis for Ambient Conversion of Plastic Waste

Monomer production from supercritical ethanol depolymerization of PET plastic waste using Ni-ZnO/Al2O3 catalyst

Development of Reusable Ni/γ-Al 2 O 3 Catalyst for Catalytic Hydrolysis of Waste PET Bottles into Terephthalic Acid

An effective method and pathways of acrylonitrile degradation to acrylic acid through an alkaline hydrothermal system.

Upcycling polymethyl methacrylate to methacrylic acid