Effect of Micron Aluminium Powder on Mechanical Properties and Microstructural in Zirconia Toughened Alumina Ceramics

Ruihao Zhang,Bao Qi,Jie Wang,Xinwei She,Zhende Ran,Xianquan Jiang

DOI: https://doi.org/10.1049/mnl.2020.0053

2020-01-01

Micro & Nano Letters

Abstract:Traditional powder metallurgy was employed to prepare alumina–zirconia (Al 2 O 3 –ZrO 2 ) and alumina–zirconia–aluminium (Al 2 O 3 –ZrO 2 –Al) ceramics. It was found that as the sintering temperature increases, the flexural strength of both ceramics increases first and then decreases. The maximum flexural strength of Al 2 O 3 –ZrO 2 appears to be 430.7 MPa when sintered at 1650°C, and Al 2 O 3 –ZrO 2 –Al appears to be 448.8 MPa when sintered at 1600°C. As the sintering temperature increases, the grain size of each phase grows up, the porosity increases, the content of intragranular phase and monoclinic ZrO 2 (m-ZrO 2 ) increases. The addition of Al powder improves the dispersion of ZrO 2 , reduces the porosity of zirconia toughened alumina ceramics, and improves the bending strength. Al powder increases the content of the intragranular ZrO 2 , restrains the t–m phase transformation, results in the decreases of the relative amount of m-ZrO 2 in ZrO 2 ( Xm ). Adding Al powder during ball milling is a simple method to increase the content of intragranular ZrO 2 in Al 2 O 3 –ZrO 2 ceramics.