Abstract:The designs of two resonant electric-field probes with improved sensitivity for near-field measurements are proposed and measurements in weak radiated level are conducted. One probe is the resonant monopole probe and the other is named the resonant T-shaped probe with further improved sensitivity. Each of the two probes is fabricated on four-layer printed circuit board using high-performance and low-loss Rogers material ( $\varepsilon _{ {r}} = 3.48$ and tan $\delta = 0.0037$ ), which consists of an LC resonator made up of a planar spiral stripline (inductor) and a rectangular plate (capacitor), a single-stub transformer, and a SubMiniature version A connector. The LC resonator can achieve a specific resonant frequency for a specific narrowband of interest with the pure input resistance. The single-stub transformer is used to transform the pure input resistance to the input impedance of measurement instruments to acquire maximum transmission power. Compared with the referenced broadband probe with the same physical size of tip, the measured $\vert \text{S}_{ {12}}\vert $ of the resonant monopole probe is enhanced by 9 dB at the resonant frequency. The resonant T-shaped probe proposed has 3.3-dB sensitivity higher than the resonant monopole probe in terms of $\vert \text{S}_{{12}}\vert $ . In order to validate the improved sensitivity of the resonant probes, comparisons on the improvement of sensitivity with other probes are also introduced.

Frequency-Diverse Near-Field Sensing Using Multiple Coupled-Resonator Probes

2-D Near-Field Sensing Technique Using Single-Port Coupled-Resonator Probe Arrays

A Miniature Multi-Component Probe for Near-Field Scanning

A Wideband and High Sensitivity Probe Design for Near-Field Scanning

An Efficient Probe Calibration Based Near-Field to Near-Field Transformation for EMI Diagnosis

Near-Field Frequency Diverse Sensing with Probe-Free Measurement Matrix Retrieval Algorithm

Probe Design and Source Reconstruction for Near-Field Scanning and Modeling

Design and Characterization of a Multi-Processed Differential Magnetic Field Probe by Using Asymmetric Calibration Method

A Resonant Magnetic Field Probe with Enhanced Sensitivity Using Quarter-wavelength Impedance Transformer

New resonant composite magnetic‐field probes with high detection sensitivity and electric‐field suppression ratio

A Near-Field Motion Detection Technique Based on a Resonant Magnetic Probe

A Dual-Component Electric Probe Embedded with a 0°/180° Hybrid Coupler for Near-Field Scanning

A Miniature Resonant Magnetic Field Probe Integrated with MLCC

Probe-Free High-Resolution Millimeter-Wave Frequency-Diverse Sensing Based on Spoof Surface Plasmon Polaritons

A new differential magnetic‐field probe with high detection sensitivity for near‐field scanning

Systematic Characterization of Dual Probes for Electromagnetic Near-Field Measurement

Improved-Sensitivity Resonant Electric-Field Probes Based on Planar Spiral Stripline and Rectangular Plate Structure

A Miniature Electric Probe with a High Spatial Resolution

Review of Near-Field EMI Measurement

Cloaked near-field probe for non-invasive near-field optical microscopy

A Composite Probe With Connected Via for High Sensitivity Measurement of Electromagnetic-Field Components