Abstract:Railway switch plates are important components in railroads, and copper-based graphite alloys have potential as substitutes for traditional materials. Graphite as an anti-friction phase could decrease both the friction coefficient and mechanical properties, with an increasing mass fraction for their poor interface bonding strength. Chromium, a multifunctional metal plated on the graphite (Cr@graphite), has solved this problem. Results have shown that a copper-based Cr@graphite alloy is composed of copper as a base, and graphite and Cr compound transition phase as reinforcements. The transition phase is made up of nano Cr3C2 and dispersed CrC, which offers a stable combination with both graphite and copper. The tribological property of copper-based graphite alloy exhibits a steadily decreasing slope with reinforcement content increasing, and the Cr@graphite samples show lower values than the alloy without any coating treatment. Both graphite and chromic oxide play role in antifriction, and are more efficient than graphite alone. Microcutting is the dominant wear method when copper-based Cr@graphite alloy has a 1 similar to 4 wt.% reinforcements content; additionally, adhesion wear and oxidation are also generated. When the anti-friction phase increases, the wear mechanism is affected, and fatigue deformation is the dominant wear method at 4 similar to 6 wt.% content. The formation of the chromic oxide phase, as well as the graphite phase, control the formation of an anti-friction layer. In that case, the tribological properties are dramatically improved with reinforcement content enhance.

Effect of Graphitization on the Microstructure and Properties of Mo2C‐Modified C/C–Cu Composites

Role of Cr-carbide Coating on Graphite Particles in the Mechanical and Wear Behavior of Graphite/Copper Composites

Enhanced Mechanical and Tribological Properties of Low-Cost Core-Shell Structured Microcrystalline Graphite/cu Composites

Effect of Purity and Proportion of Microcrystalline Graphite Ore on the Electrical, Mechanical and Tribological Performance of Copper-Carbon Composites

Enhanced mechanical and tribological properties of copper matrix composites reinforced by copper-coated graphite and Ti3AlC2

Effect of carbon matrix on mechanical and tribological properties of Cf/Cu/C composites

Enhanced softening resistance and mechanical properties of Mo 2 C particle-reinforced Cu-matrix composites

Effect of Copper-Plated Graphite Content on the Microstructure and Properties of Copper-Graphite Composites Prepared by Spark Plasma Sintering

Fabrication and Tribological Properties of Mesocarbon Microbead–Cu Friction Composites

Synergetic Effect of Graphene and MWCNTs on Microstructure and Mechanical Properties of Cu/Ti3SiC2/C Nanocomposites

Superior mechanical properties and wear resistance of copper/graphite metallic composites fabricated with fibrous copper powder

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

Study on the tribological properties of MoB/Cu laminated composite materials fabricated by hot-pressing process

Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites

The Study of Microstructure Characterization: Cu Modified Cu-Ni-graphite Composite

A Study of the Microstructure and Tribological Properties of Copper-Based Cr@graphite Alloy Modified by Nano Cr<sub>3</sub>C<sub>2</sub> and CrC

Effects of Graphite Contents on the Microstructure Evolution, Mechanical Properties and High Temperature Tribological Behavior of Cu–Ni–Al/Gr Solid-Lubricating Composites

Effect of graphene on microstructure and properties of Gr/CuCr10 composites

Effect of Carbide Interlayers on the Microstructure and Properties of Graphene-Nanoplatelet-reinforced Copper Matrix Composites

A Study of the Microstructure and Tribological Properties of Copper-Based Cr@graphite Alloy Modified by Nano Cr3C2 and CrC

Fabrication and Microstructure of C/Cu Composites