Nanocrystalline Engineering Induced High Energy Storage Performances of Fatigue-Free Ba 2 Bi 3.9 Pr 0.1 Ti 5 O 18 Ferroelectric Thin Films
Peng Wang,Xusheng Wang,Guorong Li,Rui Hu,Kun Zhu,Yanxia Li,Xi Yao,Zhongbin Pan
DOI: https://doi.org/10.1021/acsami.2c01238
2022-04-07
Abstract:Electrostatic capacitors, though presenting faster rate capability and higher power density, are hindered in applications because of their low energy density. Accordingly, many efforts in electrostatic capacitors, for electronics and electrical power systems, have mainly concentrated on the development of dielectric materials with high-energy density (Ud) and charge–discharge efficiency (η) as well as good stability performances of thermal and fatigue endurance. Herein, we demonstrate that an excellent Ud (∼90 J/cm3) and high η (∼84.2%), as well as outstanding fatigue cycles (1 × 108 st), frequency stability (20–2000 Hz), and a wide temperature range (RT ∼ 160 °C), can be attained in Ba2Bi3.9Pr0.1Ti5O18 (BBPT) ferroelectric thin films via nanocrystalline engineering. It is revealed that nanocrystalline engineering of the BBPT ferroelectric thin films could be controlled via the heat-treatment temperature, which could effectively regulate the breakdown strength and polarization. The enhanced breakdown strength and polarization of the nanocrystalline engineering is further verified through the theoretical phase-field simulations along with experimental results. These results indicate that this is a feasible and scalable route to develop dielectric thin film materials with a high energy storage capability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01238.Nominal electric field distribution of S1, S2, S3, S4, and S5 ferroelectric thin films at different moments during breakdown path growing; P–E curves, SEM images of surface morphology and cross-section, dielectric spectroscopy, Pmax and Pmax – Pr, and PFM amplitude images of the BBPT thin films at different annealing temperatures (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology