Abstract:Experimental observations and numerical results for bending responses of the double hat‐section Al‐CFRP beams Nowadays, hybrid structures, which combine low‐density composites with low‐cost thin‐walled metals, have shown great effect in enhancing the performance of automotive body structures, especially the energy absorber components. This study focuses on the experimental and numerical investigation of the bending energy absorption behavior of CFRP/aluminum hybrid double hat‐section beams used in the side part of the car body. In the experimental section, two types of double hat‐section beams were fabricated: aluminum and Al/CFRP. These beams were then subjected to quasi‐static three‐point bending tests. The results demonstrated that the hybrid beam exhibited superior energy absorption capabilities compared to the single beam. Subsequently, a finite element model was developed using LS‐Dyna software and was validated by comparing the experimental and numerical load–displacement results. In‐depth numerical analyses were conducted to investigate the influence of various design parameters, including CFRP‐reinforcement configuration, numbers of CFRP layers, CFRP ply‐angle, CFRP reinforced length, and aluminum/CFRP mass, on crashworthiness indicators. The numerical findings indicate that the hybrid beam with 04 , 45/−45s ply‐angles exhibited better crash force efficiency (CFE) and specific energy absorption (SEA) compared to other ply‐angles, respectively. Furthermore, increasing the number of CFRP layers within the total beam's mass improved its energy absorption capacity. It was also revealed that the CFRP length on the upper and lower hats could be considered as 42.5% of the total aluminum beam length, as opposed to the full CFRP length, providing enhanced energy absorption capabilities. Highlights Bending behavior of the Al and Al/CFRP double hat section beams. Effects of variable thickness and identical mass on the double hat section beam. Effects of variable ply angle and number of CFRP layers on the hybrid beams. Discrete effect of CFRP reinforcement configurations and inner CFRP lengths.

Three-point bending of thin-walled arched beams with square sections

On the Crashworthiness of Single- and Multi-Cell Arched Beams Fabricated by Three-Point Bending Method

Elastic-plastic Stability of Shear-Deformable Circular Arches

Experimental and numerical investigations on three-point bending collapse of thin-walled beams

Thin-Walled Open-Section Origami Beams for Energy Absorption

Bending collapse of optimal arched thin-walled structures

Theoretical study on the bending collapse of multi-cell thin-walled rectangular beams

A Novel Rectangular-Section Combined Beam of Welded Thin-Walled H-Shape Steel/Camphor Pine Wood: The Bending Performance Study

Behavior of Thin-Walled Dodecagonal Section Double Skin Concrete-Filled Steel Tubes under Bending

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Behavior of Thin-Walled Dodecagonal Section Double Skin Concrete-Filled Steel Tubular Beam-Columns

Seismic Behaviour of Square CFT Beam–columns under Biaxial Bending Moment

A comparative study on the energy absorption mechanism of aluminum/CFRP hybrid beams under quasi-static and dynamic bending

Quasi-static Bending Response and Energy Absorption of a Novel Sandwich Beam with a Reinforced Auxetic Core under the Fixed Boundary at Both Ends

On the bending force response of thin-walled beams under transverse loading

Three-point bending of sandwich beams with aluminum foam-filled corrugated cores

Open-section origami beams for energy absorption

Experimental and numerical investigation on the crashworthiness performance of double hat‐section Al‐CFRP beam subjected to quasi‐static bending test

Experimental Investigation into Flexural-Torsional Ultimate Resistance of Steel Circular Arches

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes