Abstract:Metal/composite hybrid structures, which combine low-density composites with low-cost metallic materials, exhibit considerable potential to provide cost-effective energy-absorbing devices for automotive applications. This study aimed to explore crashworthiness characteristics of aluminum/carbon fiber reinforced plastic (CFRP) hybrid tubes, experimentally and numerically, subjected to three different loading angles by comparing with the aluminum alone and CFRP alone tubes, in which the deformation patterns and several key indicators related to the crashworthiness of these structures were assessed. The experiments revealed that the CFRP tube has the highest SEA under the axial (37.82 J/g) and 15° loading (30.03 J/g) angles of all the configurations concerned; while the hybrid tube showed the greatest energy absorption. It was found that the energy absorption capacity of all specimens reduced in different extent with increasing loading angle. Specifically, with the loading angle up to 15°, SEA of the hybrid tube decreased by 10.0% from that with the axial loading; whereas SEA of the CFRP tube decreased by 20.6% from that of the axial loading. It means that the hybrid tube was more capable to mitigate the effects of oblique load on energy absorption capacity in comparison with the net CFRP tube. To better understand the crashing mechanism, numerical models were created and validated by the experimental data. A parametric study was further performed to investigate the effects of loading angle, thickness of aluminum layer, stacking sequence and thickness of CFRP layers on crashworthiness of these structures. It was found that the number of CFRP layers is more important to energy absorption of the hybrid tube. For the pure CFRP tube, there is significant difference between the axial and oblique loading conditions, making it disadvantageous to be a proper crashworthy structure. Whereas for the hybrid tube, the effect of loading angle on energy absorption capacity is considerably mitigated; and consequently, the hybrid configuration offers a higher energy absorption capacity for meeting the crashworthiness requirements accommodating complex impacting angles.

Bending collapse of optimal arched thin-walled structures

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

On the Crashworthiness of Single- and Multi-Cell Arched Beams Fabricated by Three-Point Bending Method

Three-point bending of thin-walled arched beams with square sections

Energy absorption optimisation of an origami-shaped crash box under axial loading

Experimental and numerical studies on bending characteristics of woven CFRP reinforced aluminum thin-walled automotive structures

Crashworthiness analysis and optimization design of special-shaped thin-walled tubes by experiments and numerical simulation

Crash resistance analysis and optimization of sponge like thin-walled pipes under multiple working conditions

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

On the bending force response of thin-walled beams under transverse loading

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Energy absorption of metal, composite and metal/composite hybrid structures under oblique crushing loading

Cross-section parameterisation and optimisation of double-hat beams under dynamic three-point bending

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Crashworthiness performance of novel thin-walled tubes with spiral cross section

An thin-walled beam enforcement structure and its dynamic bending performance analysis

In-plane nonlinear buckling analysis and design method of concrete-filled steel tubular catenary arches

Crashworthiness design of novel CFRP functionally-graded conical square structures with variable circumscribed diameters

Crashworthiness analysis and design optimization of square aluminum/CFRP hybrid structures under quasi-static axial loading

Optimization for Bending Collapse of Thin-Walled Twelve Right-Angle Section Tubes with Variable Thickness