Abstract:This paper proposes an approach to parallel filling path generation based on adaptive gaps for fused deposition modeling (FDM) with full consideration of technology characteristics of this promising fabricating method. At first, analysis on the similarities and differences between FDM and the conventional milling manufacturing is conducted from the tool-path planning perspective. Meanwhile, some specific features of FDM are analyzed in detail to point out three critical issues in the path planning process which is correlated with the fabricating quality and modeling accuracy. These issues are described specifically by means of theoretical analysis and practical fabrication: large number of uncut paths, sharp corners in the filling path, and overfill and underfill phenomena which are out of the constant gap between parallel paths. The proposed tool-path generation method determines the inclination of the reference line based on less number of sharp corners in the paths firstly. Then, the filling area is divided with three stages. The pre-sweeping stage employs a group of paralleling lines with pre-determined gaps and optimized inclination to intersect the filling boundaries and stores the intersections between them, the second stage adjusts some sweeping line segments which satisfy several specific conditions, and the last stage divides the filling areas into several sub-regions according to the selected sweeping lines. Subsequently, the sweeping lines within each sub-region are adjusted adaptively to uniform gaps individually. At last, some adjacent sub-paths that can be connected to decrease the number of uncut paths are linked. Relative performance evaluation and experimental analyses are provided to demonstrate that the proposed methods can enhance the fabricating quality significantly with some improvements in the machining efficiency.

An Efficient and Adaptable Path Planning Algorithm for Automated Fiber Placement Based on Meshing and Multi Guidelines

Algorithms for Constructing Initial and Offset Path of Automated Fiber Placement for Complex Double-Curved Surfaces

An Optimization Approach for Path Planning of High-Quality and Uniform Additive Manufacturing

Adaptive Path Planning of Fiber Placement Based on Improved Method of Mesh Dynamic Representation

An Improved Path Discretization Method for Automated Fiber Placement

Two-Stage Sector Partition Path Planning Method For Automated Fiber Placement On Complex Surfaces

A Novel Path Planning Methodology for Extrusion-Based Additive Manufacturing of Thin-Walled Parts

A Path Planning Algorithm of Closed Surface for Fiber Placement

Stress-Based Path Planning on Quad Mesh for Additive Manufacturing

Path Planning Based on Ply Orientation Information for Automatic Fiber Placement on Mesh Surface

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

Path Planning Algorithm for Fiber Placement Based on Boundaries of Tow

As-built FE Thermal Analysis for Complex Curved Structures in Automated Fiber Placement

Path Planning and Optimization Algorithm for Fiber Placement of S-shaped Inlet

Research on fiber placement machine and path planning methodology

Comparative Study on Two Methods of Fiber Placement Path Planning

Variable-Angle Trajectory Planning Algorithm for Automated Fiber Placement of Two Non-developable Surfaces

A Parallel-Based Path Generation Method for Fused Deposition Modeling

Automated fiber placement path generation method based on prospective analysis of path performance under multiple constraints

An Adaptive Tool Path Generation for Fused Deposition Modeling

Path Planning of Complicated Hierarchical Thin-Wall Structures Using Multi-Material Additive Manufacturing Technology