Abstract:Latent heat thermal energy storage (LHTES) systems based on phase change materials (PCMs) offer a reliable way to address the intermittency of renewable energy sources. The low thermal conductivity of PCMs, however, limits the practical use of LHTES systems. This work aims to investigate the effect of mixing graphene (Gr) and copper (Cu) nanoparticles at volume fractions varying from 0 % to 5 % with a PCM on the single charging/discharging performance of a cascaded packed bed LHTES system. The effect of the charge inlet temperature on the cyclic performance is also investigated by considering three cascaded configurations with encapsulated copper-nanoparticle-enhanced PCMs (Cu-NEPCMs) and six inlet temperatures ranging from 390 °C to 440 °C. A concentric-dispersion numerical model is developed to evaluate thermal performance. Synthetic PCMs with melting temperatures in the range of 320°C–380 °C are adopted as the heat storage medium, and molten salt is used as the heat transfer fluid. As the volume fraction of the Cu and Gr nanoparticles increases from 0 % to 5 %, the cascaded Cu-NEPCM and Gr-NEPCM storage systems exhibit decreases in the melting time by 14.4 % and 5.6 % and in the solidification time by 13.9 % and 6.5 %, respectively. As the inlet temperature increases from 390 °C to 440 °C, the optimal cascaded packed bed configuration among the three shows enhancements in the total energy storage in the bed, energy recovered by the salt from the bed, capacity ratio, and total utilization ratio by 82.2 %, 85.6 %, 20.3 %, and 50.5 %, respectively. This work provides insights into the design and operation of LHTES systems with enhanced performance.

Charging Performance of Latent Thermal Energy Storage System with Microencapsulated Phase-Change Material for Domestic Hot Water

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

A New Model of Phase Change Process for Thermal Energy Storage

Research on the modification of microencapsulated phase change material for thermal energy storage by nano-SiO2 and graphite

Thermal Performance Investigation of a Medium-Temperature Pilot-Scale Latent Heat Thermal Energy Storage System: the Constant and Step Temperatures Charging and Discharging

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experiments on Comparative Performance of Water Thermocline Storage Tank with and Without Encapsulated Paraffin Wax Packed Bed

Experimental and Modeling Study on Thermal Performance of Hydrated Salt Latent Heat Thermal Energy Storage System

Preparation, Characterization, and Thermal Properties of Microencapsulated Phase Change Material for Low-Temperature Thermal Energy Storage

Experimental Study on Thermal Performance of a Mobilized Thermal Energy Storage System: A Case Study of Hydrated Salt Latent Heat Storage

An Experimental Study of the Latent Functionally Thermal Fluid with Micro-Encapsulated Phase Change Material Particles Flowing in Microchannels

Experimental investigation on high energy-density and power-density hydrated salt-based thermal energy storage

Experimental Investigation of Performances of Microcapsule Phase Change Material for Thermal Energy Storage

Experimental study on the performance of a novel composite phase change energy storage material for clean heating

A General Model for Analyzing the Thermal Performance of the Heat Charging and Discharging Processes of Latent Heat Thermal Energy Storage Systems

Dynamic Performances of Solar Heat Storage System with Packed Bed Using Myristic Acid As Phase Change Material

Experimental Study on a Pilot-Scale Medium-Temperature Latent Heat Storage System with Various Fins

Effect of Charging/discharging Temperatures Upon Melting and Solidification of PCM-metal Foam Composite in a Heat Storage Tube

Dynamic Charging Performance of A Solar Latent Heat Storage Unit for Efficient Energy Utilization

Heat transfer mechanism in solar thermal energy storage systems using phase change materials

Performance investigation on the cascaded packed bed thermal energy storage system with encapsulated nano-enhanced phase change materials for high-temperature applications