Abstract:We have studied a high temperature storage heater containing an inorganic salt based composite phase change material (CPCM) for electrical load shift and operation cost reduction. The storage heater consists of CPCM modules with embedded electrical elements for charging at off‐peak hours and flow channels for discharging the stored heat in a controlled manner when needed. The flow channels are for heat transfer fluid (HTF, air in this work) to exchange heat with the CPCM modules and transport the heat to the heating space. A series of experiments are carried out to study the charging and discharging behavior of the storage heater. The effects of the flow channel arrangements between the CPCM modules, and the heating element arrangements inside the heater are studied. A mathematical model is also developed to investigate the performance of the storage heater with a focus on the performance comparison of the storage heater filled with the CPCM and that with the ferric oxide bricks (the conventional sensible heat storage material), and the evaluation of temperature control strategy for the CPCM based storage heater. The results show that a charge of 8 hours of the storage heater during the off‐peak period is sufficient to supply heat for the whole day under the conditions of this work. The flow channel arrangements have significant influences on the storage heater performance in terms of temperature distribution of the CPCM modules and HTF outlet temperature, and the efficiencies of the charging and discharging processes. An interlaced arrangement of CPCM modules in the heater can effectively reduce the temperature swing (eg, between 21.7°C and 22.5°C over a day) and hence improve the room thermal comfort level. The results also show that the CPCM based storage heater gives a superior performance than the ferric oxide based storage heater. Given the storage volume, the power rating, and the amount of stored heat, the mass of the ferric oxide based storage heater is more than 1.6 times that of the CPCM based storage heater. Given the mass and power rating, the heat storage capacity of the CPCM based heater is nearly 68% higher than that of the ferric oxide based storage heater. It is also found that the heat storage performance could be enhanced through a temperature control strategy with the temperature measurement located 15 mm away from the heating elements, for which the heating elements only need two start‐stops over the 8‐hour charging period.

Experimental study on the performance of a novel composite phase change energy storage material for clean heating

A shape-stabilized MgCl2·6H2O–Mg(NO3)2·6H2O/expanded graphite composite phase change material with high thermal conductivity and stability

Experimental Research of the Heat Storage Performance of a Magnesium Nitrate Hexahydrate-Based Phase Change Material for Building Heating

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Preparation and characterization of myristic acid/expanded graphite composite phase change materials for thermal energy storage

Preparation and Thermal Properties of N-Eicosane/nano-sio2/expanded Graphite Composite Phase-Change Material for Thermal Energy Storage

Preparation and thermal performance enhancement of sodium thiosulfate pentahydrate- sodium acetate trihydrate /expanded graphite phase change energy storage composites

N-eicosane/expanded Graphite As Composite Phase Change Materials for Electro-Driven Thermal Energy Storage

Preparation and application of composite EG/Ba(OH)2·8H2O form‐stable phase change material for solar thermal storage

A novel composite phase change material of high-density polyethylene/d-mannitol/expanded graphite for medium-temperature thermal energy storage: Characterization and thermal properties

Low-cost magnesium-based eutectic salt hydrate phase change material with enhanced thermal performance for energy storage

Polyethylene glycol/carboxymethyl cellulose/montmorillonite composite phase change materials for thermal management

Cellulose nanofibrous/MXene aerogel encapsulated phase change composites with excellent thermal energy conversion and storage capacity

Characterization and experimental investigation of composite phase change materials based on aluminum nitride/expanded graphite

Thermal characteristics of the multilayered structural MOF-EG/OC composite phase change material in thermal energy storage

A novel high temperature electrical storage heater using an inorganic salt based composite phase change material

Thermal properties of eutectic salts/ceramics/expanded graphite composite phase change materials for high-temperature thermal energy storage

Preparation and properties of CaCl2·6H2O/silica aerogel composite phase change material for building energy conservation

Study on three-dimensional porous carbon fiber-MWCNTs-PEG phase change materials and its photo/electricity-thermal conversion performance

An innovative modified calcium chloride hexahydrate–based composite phase change material for thermal energy storage and indoor temperature regulation

High thermal conductivity composite phase change material with Zn 2+ metal organic gel and expanded graphite for battery thermal management