Abstract:The focused solar water heating system can automatically adjust its focus according to the solar angle for higher heating rate and source temperature. One of the major challenges for such solar heat collector is stabilizing its daily heat outputs. This study intends to utilize a bulk low melting point alloy (140 degrees C)/expanded graphite (mass ratio of 9:1) composite phase change energy storage material to assure the stability and availability of the hot water output. To investigate the thermal properties of the proposed new material with different apparent densities, this study conducted scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) tests to examine its thermal conductivity, storage density, and stability. The results of SEM show that the porous structure of expanded graphite (EG) can effectively adsorb the alloy and prevent material leakage. The XRD test shows that the formation of the low melting point alloy and the expanded graphite is a physical process without new substance creation. The DSC test shows the phase change temperature of the composite phase change material (PCM) is about 140 degrees C with an enthalpy of 45.05 kJ kg(-1) (0.46% different from its theoretical value). The thermal conductivity of the bulk alloy/expanded graphite composite PCM with density of 2083 kg m(-3), 2500 kg m(-3), 3125 kg m(-3), 4167 kg m(-3) and 5000 kg m(-3) are 12.65 W m(-1) K-1, 14.64 W m(-1) K-1, 20.80 W m(-1)K(-1), 28.16 W m(-1)K(-1) and 32.64 W m(-1) K-1, respectively, which has an improved thermal conductivity compared to pure alloys (12.44 W m(-1) K-1), especially the bulk composite PCM with a density of 5000 kg m(-3) has the best thermal conductivity and the volumetric energy storage density reaches 2.25 x 10(5) kJ m(-3), higher than the phase change heat storage density of most PCMs for thermal management, such as paraffin (volume heat density is 1.8 x 105 kJ m(-3)), and repeated heating in an environment of high temperature of 180 degrees C does not leak. The results suggested that the developed composite phase change energy storage material with an apparent density of 5000 kg m(-3) has high heat storage capacity, thermal conductivity, energy density and is able to effectively improve the heat exchange rate of the focused solar water heating system.

Characterization and experimental investigation of composite phase change materials based on aluminum nitride/expanded graphite

EXPERIMENTAL RESEARCH OF THE PHASE-CHANGE HEAT STORAGE MATERIALS PENTAERYTHROTOL AND TRIMETHYLOLETHANE

Preparation and Thermal Properties of Low Melting Point Alloy/expanded Graphite Composite Phase Change Materials Used in Solar Water Storage System

Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using β-Aluminum nitride

Experimental Investigations of Alum/expanded Graphite Composite Phase Change Material for Thermal Energy Storage and Its Compatibility with Metals

Nano additives-enhanced PEG /AlN composites with high cycle stability to improve thermal and heat storage properties

Polyethylene Glycol Infiltrated Biomass-Derived Porous Carbon Phase Change Composites for Efficient Thermal Energy Storage

Experimental Analysis on Phase-Change Heat Storage Materials PG and PE

Enhancement of Thermal Performance of Composite Phase Change Materials by Graphite in Situ Modified Al2O3 Porous Support

Thermal performance analysis of a thermal enhanced form-stable composite phase change material with aluminum nitride

Assembling and characterizing of high-loading and steady-shape graphene aerogel composite phase change material with nano-AlN─as an efficient thermal conductivity enhancer

Preparation and application of composite EG/Ba(OH)2·8H2O form‐stable phase change material for solar thermal storage

Thermal and Photo/electro-Thermal Conversion Characteristics of High Energy Storage Density Expanded Graphite/polyethylene Glycol Shaped Composite Phase Change Materials

Thermal conductivity enhancement of polyethylene glycol/NF composite as stabilized phase change materials for thermal energy storage

Cost-Effective Biochar Produced from Agricultural Residues and Its Application for Preparation of High Performance Form-Stable Phase Change Material via Simple Method

Mg(NO3)2·6H2O-LiNO3 eutectic/expanded graphite composite phase change material for thermal energy storage applications

Development of heat transfer enhancement of a novel composite phase change material with adjustable phase change temperature

Comprehensive Performance of Composite Phase Change Materials Based on Eutectic Chloride with SiO2 Nanoparticles and Expanded Graphite for Thermal Energy Storage System

Preparation and Thermal Properties of Porous Heterogeneous Composite Phase Change Materials Based on Molten Salts/Expanded Graphite

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

A Shape-Stabilized Mgcl2 Center Dot 6h(2)O-Mg(No3)(2)Center Dot 6h(2)O/Expanded Graphite Composite Phase Change Material With High Thermal Conductivity And Stability