Abstract:Latent heat storage and efficient heat transport technology helps to utilize the intermittent solar energy for continuous and near isothermal applications. However, many latent heat storages face challenges of storage charging, heat retaining, and discharging the stored heat. This paper tries to address the challenges of heat transportation and storage charging-discharging issues. The heat transportation from the receiver over some distance, from outside to the kitchen, is carried out with a stainless pipeline and water as heat transfer fluids. However, the charging-discharging process is carried by conduction method with the help of fins. In addition, the stored heat is retained for about one-two days by using aerogel insulation. The latent heat is stored in a phase change material (PCM), nitrate salt (mixture of 60% NaNO 3 and 40% KNO 3 ), which melts at 222ºC and has 109 J/g specific heat of fusion. The storage has the capacity of storing up to 250ºC heat and supply this heat isothermally during baking in the liquid-solid phase transition. However, the sensible heat stored in the solid and liquid form of the PCM is used to perform additional applications that do not require uniform heat which includes bread baking, kita (large pancake) baking and water boiling. The low thermal conductivity of PCM is enhanced by using extended aluminum fins that are attached to the baking plate and extruded inward to the storage. In this paper, two-phase loop thermosyphon of steam is used to manage the long distance heat transportation required between the receiver (outside) and the storage (inside a house). The steam in the thermosyphon flow has restricted to a maximum working temperature of 250ºC. Steam is selected for its highest heat capacity, availability and stable nature. It carries heat from the collector focus point and condenses in a coiled pipe imbedded in aluminum plate placed on top of the storage. Many fins are solidly attached to this plate to conduct the heat down to the PCM inside the storage during charging. This design configuration avoids pressure development inside the PCM storage and the charging-discharging temperature is recorded in three zones (top, middle and bottom) of the storage. The experimental and numerical results show that the heat transportation, retention and charging-discharging methods are effective. Keywords : Solar energy, PCM storage, Latent heat storage, Two-phase thermosyphon.

Dynamic Charging Performance of A Solar Latent Heat Storage Unit for Efficient Energy Utilization

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Dynamic Performances Of Solar Heat Storage System Using Packed Bed

Dynamic Performances of Solar Heat Storage System with Packed Bed Using Myristic Acid As Phase Change Material

Dynamic discharging characteristics simulation on solar heat storage system with spherical capsules using paraffin as heat storage material

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

The Discharging Characteristics of a Solar Thermal Storage System Using a Packed Bed with Spherical Capsules

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Performance Study of Phase Change Charging/discharging Processes of Condensing Heat Storage in Cold Regions Based on a Mathematical Model

Simulation of dynamic charging performance of packed bed using cool storage capsules

Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material

Parametric Study on Melting Process of a Shell-and-tube Latent Thermal Energy Storage under Fluctuating Thermal Conditions

Thermal performance analysis and optimization of cascaded packed bed latent heat storage tank

Dynamic charging characteristics modeling of heat storage device with heat pipe

Performance Assessment of Three Latent Heat Storage Designs for a Solar Hot Water Tank

Experimental study on the performance of packed-bed latent thermal energy storage system employing spherical capsules with hollow channels

An Experimental Study of the Heat Storage and the Discharge Performance and an Economic Performance Analysis of a Flat Plate Phase Change Material (PCM) Storage Tank

An experimental investigation on the heat transfer characteristics of cascaded thermal storage units based on multichannel flat tubes

Steam-based charging-discharging of a PCM heat storage

Pore-scale numerical investigation on the thermal storage properties of packed-bed systems with phase change material microcapsules

Effect of Charging/discharging Temperatures Upon Melting and Solidification of PCM-metal Foam Composite in a Heat Storage Tube