Abstract:Carbon coating has been an effective procedure to tackle the severe structural degradation and poor conductivity during cycling of silicon-based anodes in lithium-ion batteries (LIBs). However, the traditional coated carbon usually is tight and thus limit the fast-charging rate and high specific capacity. Herein, through in-situ formation of metal-organic frameworks on the surface, silicon particles were firstly coated by an inside carbon layer. Followed by a solvothermal reaction with the mixture of sucrose and graphene oxide, the second carbon layer outside the silicon particles was deposited, and simultaneously a highly conductive graphene network was formed. After a high temperature pyrolysis process, a graphene matrix supported silicon material with inward multi-channel carbon and outward tight activated carbon was prepared. This unique core/double-layer carbon structure, combined with the highly conductive graphene frameworks, render the material to demonstrate excellent electrochemical performance as anode materials for LIBs in terms of both lithium storage capacity and cycling stability. Thus, the electrode materials deliver a high specific capacity of 1528.1 mA h g−1 at the current density of 0.1 A g−1 and rate capacity retention of 45.5% at 1 A g−1 to 0.1 A g−1. Simultaneously, a highly stable reversible capacity of 1182 mAh g−1 with 89.5% retention over 240 cycles at a current density of 0.2 A g−1 and 484 mAh g−1 with 76.8% retention after 450 cycles at 1.0 A g−1 were obtained. This work can offer an alternative approach for high-energy and low-cost silicon-based anodes for LIBs.

Large Reversible Capacity of High Quality Graphene Sheets As an Anode Material for Lithium-Ion Batteries

Superhigh Capacity and Rate Capability of High-Level Nitrogen-Doped Graphene Sheets As Anode Materials for Lithium-Ion Batteries

Graphene sheets as anode materials for Li-ion batteries: preparation, structure, electrochemical properties and mechanism for lithium storage

Superior cycle stability of graphene nanosheets prepared by freeze-drying process as anodes for lithium-ion batteries

High Reversible Capacity of SnO2/graphene Nanocomposite As an Anode Material for Lithium-Ion Batteries

Large size nitrogen-doped graphene-coated graphite for high performance lithium-ion battery anode

High-quality mesoporous graphene particles as high-energy and fast-charging anodes for lithium-ion batteries

Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries.

Ni2p/Graphene Sheets As Anode Materials With Enhanced Electrochemical Properties Versus Lithium

High specific capacity of TiO 2 -graphene nanocomposite as an anode material for lithium-ion batteries in an enlarged potential window

Graphene-Wrapped Fe3o4 Anode Material with Improved Reversible Capacity and Cyclic Stability for Lithium Ion Batteries

Mesoporous Graphene Hosts for Dendrite-Free Lithium Metal Anode in Working Rechargeable Batteries

Design and Synthesis of N-Doped Graphene Sheets Loaded with Li4ti5o12 Nanocrystals As Advanced Anode Material for Li-Ion Batteries

Graphene supported double-layer carbon encapsulated silicon for high-performance lithium-ion battery anode materials

High Rate Capability of TiO2/nitrogen-doped Graphene Nanocomposite As an Anode Material for Lithium–ion Batteries

Facile Preparation of Graphene/SnO₂ Xerogel Hybrids as the Anode Material in Li-Ion Batteries.

Ultrafast transformation of natural graphite into self-supporting graphene as superior anode materials for lithium-ion batteries

Two-dimensional Mesoporous Carbon Nanosheets and Their Derived Graphene Nanosheets: Synthesis and Efficient Lithium Ion Storage.

Porous Three-Dimensional Activated Microwave Exfoliated Graphite Oxide As an Anode Material for Lithium Ion Batteries

Superior Li-ion Storage Performance of Graphene Decorated NiO Nanowalls on Ni As Anode for Lithium Ion Batteries

Gram-Scale Synthesis of Graphene-Mesoporous SnO2 Composite As Anode for Lithium-ion Batteries