Abstract:Abstract Hollow-structured NiO + Ni nanofibers wrapped by graphene were designed and successfully fabricated via a simple method. First, solid NiO + Ni nanofibers were prepared by electrospinning followed by calcination. Here, a portion of the metallic Ni was retained to improve the electrochemical performance of NiO by adjusting the calcination temperature. Next, the nanofibers were thoroughly mixed with different amounts of graphene and calcinated once more to form hollow-structured NiO + Ni nanofibers with an extremely high specific surface via the reaction between graphene and NiO on the nanofiber surface and subsequent migration of NiO into the nanofibers. Results showed that the obtained hollow-structured NiO + Ni electrode demonstrates optimal electrochemical performance when the graphene content is controlled to 3 wt%. The first cycle discharge/charge specific capacity of the electrode peaked (1596/1181 mAh · g −1 ) at 100 mA · g −1 , with a coulombic efficiency of approximately 74% (60% for 0 wt% graphene, 65% for 1 wt% graphene, and 51% for 4 wt% graphene). It also presented excellent cycling stability after 100 cycles at 100 mA · g −1 on account of its high retained discharge specific capacity (251 mAh · g −1 for 0 wt% graphene, 385 mAh · g −1 for 1 wt% graphene, 741 mAh · g −1 for 3 wt% graphene, and 367 mAh · g −1 for 4 wt% graphene). Moreover, the synthesized electrode possessed outstanding rate capability owing to its large average discharge specific capacity of approximately 546 mAh · g −1 (45 mAh · g −1 for 0 wt% graphene, 256 mAh · g −1 for 1 wt% graphene, and 174 mAh · g −1 for 4 wt% graphene) from 100 mA · g −1 to 2000 mA · g −1 . The observed improvement in electrochemical performance could be attributed to the increase in active sites and decrease in charge transport distance in the hollow-structured NiO + Ni nanofibers. Excessive introduction of graphene caused a sharp loss in electrochemical performance due to the agglomeration of graphene sheets on the nanofiber surfaces.

Superior cycle stability of graphene nanosheets prepared by freeze-drying process as anodes for lithium-ion batteries

Large Reversible Capacity of High Quality Graphene Sheets As an Anode Material for Lithium-Ion Batteries

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

Superhigh Capacity and Rate Capability of High-Level Nitrogen-Doped Graphene Sheets As Anode Materials for Lithium-Ion Batteries

Superior Li-ion Storage Performance of Graphene Decorated NiO Nanowalls on Ni As Anode for Lithium Ion Batteries

A novel carbon microspheres@SnO2/reduced graphene composite as anode for lithium-ion batteries with superior cycle stability

Synthesis and electrochemical performance of hollow-structured NiO + Ni nanofibers wrapped by graphene as anodes for Li-ion batteries

Graphene sheets as anode materials for Li-ion batteries: preparation, structure, electrochemical properties and mechanism for lithium storage

Free-Standing Graphene-Encapsulated Silicon Nanoparticle Aerogel As an Anode for Lithium Ion Batteries

Design and Synthesis of N-Doped Graphene Sheets Loaded with Li4ti5o12 Nanocrystals As Advanced Anode Material for Li-Ion Batteries

Robust and Stable Intercalated Graphene Encapsulation of Tin Nanorods for Enhanced Cycle and Capacity Performance for Lithium Storage

Silicon doped graphene as high cycle performance anode for lithium-ion batteries

A Hierarchical SiO 2 -Microsphere-Graphene Host Enabling Superior Long-Term Cycling for Lithium-Metal Anodes

Graphene foam as a stable anode material in lithium‐ion batteries

Toward uniform Li plating/stripping by optimizing Li-ion transport and nucleation of engineered graphene aerogel

Freeze-drying-assisted fabrication of flexible graphene/SnO2 for high-rate lithium-ion batteries

High Rate Capability of TiO2/nitrogen-doped Graphene Nanocomposite As an Anode Material for Lithium–ion Batteries

Two-dimensional Mesoporous Carbon Nanosheets and Their Derived Graphene Nanosheets: Synthesis and Efficient Lithium Ion Storage.

An Insight into the Convenience and Efficiency of the Freeze-Drying Route to Construct 3D Graphene-Based Hybrids for Lithium-Ion Batteries

Ni2p/Graphene Sheets As Anode Materials With Enhanced Electrochemical Properties Versus Lithium

Graphene-Wrapped Fe3o4 Anode Material with Improved Reversible Capacity and Cyclic Stability for Lithium Ion Batteries