Abstract:Abstract Hollow-structured NiO + Ni nanofibers wrapped by graphene were designed and successfully fabricated via a simple method. First, solid NiO + Ni nanofibers were prepared by electrospinning followed by calcination. Here, a portion of the metallic Ni was retained to improve the electrochemical performance of NiO by adjusting the calcination temperature. Next, the nanofibers were thoroughly mixed with different amounts of graphene and calcinated once more to form hollow-structured NiO + Ni nanofibers with an extremely high specific surface via the reaction between graphene and NiO on the nanofiber surface and subsequent migration of NiO into the nanofibers. Results showed that the obtained hollow-structured NiO + Ni electrode demonstrates optimal electrochemical performance when the graphene content is controlled to 3 wt%. The first cycle discharge/charge specific capacity of the electrode peaked (1596/1181 mAh · g −1 ) at 100 mA · g −1 , with a coulombic efficiency of approximately 74% (60% for 0 wt% graphene, 65% for 1 wt% graphene, and 51% for 4 wt% graphene). It also presented excellent cycling stability after 100 cycles at 100 mA · g −1 on account of its high retained discharge specific capacity (251 mAh · g −1 for 0 wt% graphene, 385 mAh · g −1 for 1 wt% graphene, 741 mAh · g −1 for 3 wt% graphene, and 367 mAh · g −1 for 4 wt% graphene). Moreover, the synthesized electrode possessed outstanding rate capability owing to its large average discharge specific capacity of approximately 546 mAh · g −1 (45 mAh · g −1 for 0 wt% graphene, 256 mAh · g −1 for 1 wt% graphene, and 174 mAh · g −1 for 4 wt% graphene) from 100 mA · g −1 to 2000 mA · g −1 . The observed improvement in electrochemical performance could be attributed to the increase in active sites and decrease in charge transport distance in the hollow-structured NiO + Ni nanofibers. Excessive introduction of graphene caused a sharp loss in electrochemical performance due to the agglomeration of graphene sheets on the nanofiber surfaces.

Superior Li-ion Storage Performance of Graphene Decorated NiO Nanowalls on Ni As Anode for Lithium Ion Batteries

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Facile Preparation of NiO@graphene Nanocomposite with Superior Performances As Anode for Li-ion Batteries

Nanostructured Nb2O5 Cathode for High-Performance Lithium-Ion Battery with Super-P and Graphene Compound Conductive Agents

Synthesis and electrochemical performance of hollow-structured NiO + Ni nanofibers wrapped by graphene as anodes for Li-ion batteries

Uniformly Loading NiO Nanowalls on Graphene and Their Extremely High Capacity and Cyclability As Anodes of Lithium-Ion Batteries

A Novel Electrochemical Reconstruction in Nickel Oxide Nanowalls on Ni Foam and the Fine Electrochemical Performance As Anode for Lithium Ion Batteries

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

NiO/Graphene Nanocomposite As Anode Material for Lithium–Ion Batteries

Graphene Anchored with Mesoporous Nio Nanoplates As Anode Material for Lithium-Ion Batteries

Designed constitution of NiO/Ni nanostructured electrode for high performance lithium ion battery

Li3VO4/N-doped Graphene with High Capacity and Excellent Cycle Stability As Anode for Lithium Ion Batteries

Boosting the lithium and sodium storage performance of graphene-based composite via pore engineering and surface protection

Graphene@Nanoporous Nickel Cathode for Li−O2 Batteries

NiO–graphene Hybrid As an Anode Material for Lithium Ion Batteries

Multishelled NiO Hollow Spheres Decorated by Graphene Nanosheets As Anodes for Lithium-Ion Batteries with Improved Reversible Capacity and Cycling Stability

Three-dimensional Graphene Sheets with NiO Nanobelt Outgrowths for Enhanced Capacity and Long Term High Rate Cycling Li-ion Battery Anode Material

Regenerated Graphite-Derived Cellular-Inspired Polydopamine@NiO@Graphite toward Robust Lithium Storage

Graphene improving lithium-ion battery performance by construction of NiCo2O4/graphene hybrid nanosheet arrays

3D-Hierarchical NiO–graphene Nanosheet Composites As Anodes for Lithium Ion Batteries with Improved Reversible Capacity and Cycle Stability

Rational Design of Graphene-Reinforced MnO Nanowires with Enhanced Electrochemical Performance for Li-Ion Batteries.