Abstract:Cathode materials play a crucial role in dye-sensitized solar cells (DSSCs). Herein we present the applications of graphene based composites, conductive polymers and metal selenides in DSSCs as the cathode. Monolayer of PDDA/graphene/PDDA/H2PtCl6 is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in DSSC. As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. Close-packed graphene suffers from a low surface area, which limits its electrocatalytic activity as the counter electrode in DSSCs. To solve this problem, we have synthesized a porous graphene/SiO2 nanocomposite converted from graphene oxide mixed with SiO2 nanoparticles through facile hydrazine hydrate reduction. Graphene and graphene/SiO2 films prepared by drop-casting the suspensions onto the conductive glass substrates at room temperature without heat treatment have been applied directly as cathodes in DSSCs. As compared to the nonporous graphene film, the porous graphene/SiO2 composite film demonstrates much better electrocatalytic performance for the reduction of triiodide in DSSCs due to the remarkably enhanced surface area. As a consequence, the incorporation of SiO2 nanoparticles in the graphene film improves fill factor and power conversion efficiency by 65% and 69%, respectively. Oriented polyaniline nanowires array has been successfully grown in situ on conductive glass substrates without templates and applied as the cathode of DSSCs mediated with a Co(bpy) 3+/2+ 3 (bpy = 2,2′-bipyridine) redox couple. As compared to the polyaniline film with a random network, the oriented polyaniline nanowires array exhibits much better electrocatalytic performance, which is even outperforming the typical Pt electrode in both electrocatalytic performance and electrochemical stability when exposed to the acetonitrile solution of Co(bpy) 3+/2+ 3 redox couple. We have also proposed a facile one-step low temperature hydrothermal approach for in-situ growth of metal selenides (Co Se and Ni 1 0.85 0.85Se) on conductive glass substrates. The as-prepared metal selenides on conductive substrates can be used directly as transparent cathodes for DSSCs without any post-treatments. It is found that graphene-like Co0.85Se exhibits higher electrocatalytic activity than Pt for the reduction of triiodide. As a consequence, the DSSC with Co0.85Se generates higher short-circuit photocurrent and power conversion efficiency (9.40%) than that with Pt. These findings provide new routes to fabrication of cheap and efficient counter electrodes for DSSCs.

Hybrid Graphene/metal Oxide Anodes for Efficient and Stable Dye Sensitized Solar Cell

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Enhanced Performance of the Dye-Sensitized Solar Cells by the Introduction of Graphene Oxide into the TiO2 Photoanode

Binder-Free Graphene Organogels As Cost-Efficient Counter Electrodes for Dye-Sensitized Solar Cells

Enhanced Electrocatalytic Performance Of Graphene Via Incorporation Of Sio2 Nanoparticles For Dye-Sensitized Solar Cells

Improved Performance of DSSC Photoanodes After the Modification of TiO2 with Reduced Graphene Oxide

Effect of modified titanium dioxide photoanode and agarose gel electrolyte on electrochemical studies of dye-sensitized solar cell

Enhancement of power conversion efficiency of dye-sensitized solar cells by co-sensitization of zinc-porphyrin and thiocyanate-free ruthenium(ii)-terpyridine dyes and graphene modified TiO2 photoanode

Hydrothermal Synthesis of ZnO/Graphene Quantum Dots-Polymer as an Efficient Photoanode Electrode for High-Performance Dye-Sensitized Solar Cells

Enhanced photovoltaic performance of a dye-sensitized solar cell using graphene-TiO2 photoanode prepared by a novel in situ simultaneous reduction-hydrolysis technique.

Efficient Electrocatalysts for Dye-Sensitized Solar Cells

Graphene-Based Dye-Sensitized Solar Cells: A Review

Synergistic Incorporation of 2D Graphitic Carbon Nitride into Bimetal Oxide Photoanodes Towards Higher-Performance DSSCs

New Insights into Improving the Photovoltaic Performance of Dye-Sensitized Solar Cells by Removing Platinum from the Counter Electrode Using a Graphene-MoS2 Composite or Hybrid

The Enhancement of Photoanode Efficiency in Dye-Sensitized Solar Cells with TiO₂/Graphene Nanocomposite

Growth of NiS/graphene Nanocomposites for Enhanced Performance of Dye Sensitized Solar Cells

Improved properties of dye-sensitized solar cells by incorporation of graphene into the photoelectrodes

Room-temperature preparation of TiO2/graphene composite photoanodes for efficient dye-sensitized solar cells

Balance of Catalytic Activity and Conductivity of Cu2ZnSnS4/graphene Counter Electrode for Dye-Sensitized Solar Cells: Using Hydrothermal-Synthesized Kesterite Cu2ZnSnS4 and Graphene Obtained by Product Line

Perovskite zinc titanate-reduced graphene oxide nanocomposite photoanode for improved photovoltaic performance in dye-sensitized solar cell