Abstract:The microstructures and corrosion behaviors of as-cast, T4-treated, and T6-treated Mg-6Gd-3Y-0.5Zr alloys were systematically investigated by SEM, TEM, immersion test, and electrochemical corrosion test. The results show that the microstructure of the as-cast alloy is composed of α-Mg and Mg 24 (Gd, Y) 5 eutectic phase, and in T4-treated alloy, Mg 24 (Gd, Y) 5 phase dissolves into the α-Mg matrix, leading to an increase in the (Y, Gd)H 2 phase. After T6 treatment, nanoscale Mg 24 (Gd, Y) 5 phase dispersedly precipitates from the α-Mg matrix, and exhibits a specific orientation relationship with the . The corrosion resistance of the Mg-6Gd-3Y-0.5Zr alloys can be ranked in the following order: T6-treated alloy exhibits the highest corrosion resistance, followed by the T4-treated alloy, and finally, the as-cast alloy. The corrosion products of the alloys are all composed of MgO, Mg(OH) 2 , Gd 2 O 3 , Y 2 O 3 , and MgCl 2 . The corrosion behavior of Mg-6Gd-3Y-0.5Zr alloy is closely related to the precipitated phase. By establishing the relationship between corrosion rate, hydrogen evolution rate, and corrosion potential, it is further demonstrated that during the micro galvanic corrosion process, the coarse Mg 24 (Gd, Y) 5 phase in the as-cast alloy undergoes extensive dissolution, and (Y, Gd)H 2 phase promotes the dissolution of the α-Mg matrix in the T4-treated alloy, intensifying the hydrogen evolution reaction. The T6-treated alloy, with dispersive precipitation of nanoscale Mg 24 (Gd, Y) 5 phase, exhibits better corrosion resistance performance.

Comparative Study on Corrosion Behavior of Cast and Forged Mg-5Y-7Gd-1Nd-0.5Zr Alloys

Comparison of Corrosion Performance of Extruded and Forged WE43 Mg Alloy

Different Microgalvanic Corrosion Behavior of Cast and Extruded Ew75 Mg Alloys

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Comparative Study on Corrosion Behavior of As-Cast and Extruded Mg–5Y–7Gd–1Nd–0.5Zr Alloy in 5% NaCl Aqueous Solution

Comparison of the Corrosion Behaviors of Mg–Gd–Y–Zn–Zr Alloys Fabricated by Different Preparation Methods

Investigation of Corrosion Behaviors of Mg–6Gd–3Y–0.4Zr Alloy in NaCl Aqueous Solutions

Effect of heat treatment on corrosion behaviors of Mg-6Gd-3Y-0.5Zr alloy

Effects of Rare Earth Yttrium on Microstructure and Properties of Mg-Al-Zn Alloy

Influence of Specific Second Phases on Corrosion Behaviors of Mg-Zn-Gd-Zr Alloys

Influence of Nd and Y Additions on the Corrosion Behaviour of Extruded Mg-Zn-Zr Alloys

Microstructure and Salt Fog Corrosion of Wrought Mg-Al-Zn and Mg-RE Alloys

In Vitro Corrosion of Mg-6zn-1mn-4sn-1.5nd/0.5y Alloys

Enhanced Strength and Corrosion Resistance of Mg-Gd-Y-Zr Alloy with Ultrafine Grains

Effect of Heat Treatments on the Corrosion Resistance of a High Strength Mg-Gd-Y-Zn-Zr Alloy

Effects of Gd on Microstructure and Corrosion Resistance of Mg-Gd-Y-Sm-Zr Rare Earth Magnesium Alloys

Roles of micro-alloyed Y and Gd in improving the corrosion resistance and mechanical properties of pure Mg

Effect of Heat Treatment on Corrosion Behavior of Low Pressure Sand Cast Mg-10Gd-3Y-0.5Zr Alloys

Effect of Microstructure on the Corrosion Behavior of as-cast and Extruded Mg–Sn–Y Alloys

Effect of Microstructure Evolution on the Corrosion Behavior of Extrusion-Shearing Mg-3zn-Xca-0.6zr Alloys

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States