Abstract:Summary In this work, the influence of the second phase fine powders on solid state sintering process was in situ investigated by synchrotron radiation X-ray computed tomography (SR-CT) technique. Microstructure evolution of the pure SiO2 powders and SiO2 powders mixed with Si3N4 fine powders during sintering is observed respectively from the SR-CT reconstructed images. Sintering process, as the final and the most crucial step for the preparation of various ceramic materials, will inevitably affect the microstructure and properties of the material. The inclusions with different kinds or particle size may promote or hinder the sintering process. Mixed powder system is widely applied to prepare some particular material. Therefore, many scholars pay attention to the research on the influence of inclusions on the original components during solid state sintering. In order to avoid interrupting the sintering process and the destruction of the specimen, the SR-CT technique is selected in this paper. The pure SiO2 powders and SiO2 powders mixed with Si3N4 fine powders are used for comparative sintering experiment. The temperature was controlled at a relatively low degree to avoid various kinds of complex chemical reactions. The 3D reconstructed images provide a good understanding of various kinds of sintering phenomena. The influence of the Si3N4 fine powders on the sintering process of the original system was quantitatively analyzed: - The densification rate of the sample became bigger, and the sample got a larger relative density after sintering. - The evolution of the pore shape was promoted. More pores got a higher degree of sphericity. - The sintering neck size at different sintering time was calculated. The sintering neck between the SiO2 particles grew faster. The neck growth exponent became 4.45 from the original 7.89. All the parameter variation indicates that the sintering process was promoted by adding the Si3N4 fine powders. The particle size of the Si3N4 fine powders is considered as the main reason to explain why the experimental result is different from that of several other researchers’. The qualitative analysis of the way how the second phase powders accelerate the sintering process was carried out.

In Situ Observation of the Microstructure-evolution in Silicon Nitride Ceramics Sintering by Synchrotron Radiation X-ray Computed Tomography

Microstructures-evolution Observation of Boron Carbide Ceramic During Sintering Process by Synchrotron Radiation X-Ray Computed Tomography

In situ investigation of the silicon carbide particles sintering

In situ investigation of ceramic sintering by synchrotron radiation X-ray computed tomography

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

In Situ Observation of Grain Evolution in Ceramic Sintering by Sr-Ct Technique

In situ investigation of SiC powder’s microwave sintering by SR-CT technique

Microstructure Evolution of Aluminum Powder During Sintering

In situ investigation of metal's microwave sintering

The Development of a Novel SR-CT Technique-Originated Equipment for Microwave Sintering

Observation on the ceramic powder evolution during sintering by synchrotron radiation X-ray computed tomography

Microstructure Control and Mechanical Properties of Porous Silicon Nitride Ceramics

3D Online Submicron Scale Observation of Mixed Metal Powder's Microstructure Evolution in High Temperature and Microwave Compound Fields

In Situ Investigation on the Evolution Mechanism of Heterogeneous Micro-Scale Structure in Potassium-Niobate Microwave Flash Sintering

Microstructure Characterization by X-Ray Computed Tomography of C/C-SiC Ceramic Composites Fabricated with Different Carbon Fiber Architectures

Study on Microstructures of 2D and 3D Chemical Vapor Infiltration SiC/SiC Composites

Exploring the sintering behavior of a complex ceramic powder system using in-situ X-ray nano-tomography

In Situ Investigation on the Mixed-Interaction Mechanisms in the Metal–ceramic System’s Microwave Sintering

In Situ Investigation of the Promotion of Sintering by Introducing the Second Phase Powders

In Situ SR-CT Experiment of Al–SiC Microwave Rapid Sintering: Formation and Regulation of Rapid Densification

Study on In-Situ Reaction Synthesis and Mechanical Properties of Si2N2O Ceramic