Abstract:Construction errors are inevitable in real cable-strut tensile structures. Nevertheless, the relevant work, especially the monitoring scheme design work, to control the construction errors is lacking. At present, the monitoring schemes always lay out the monitored members in the places with great internal force or great deformation, do not consider the method to control the construction errors and do not explain the method to lay out the monitored members in fundamental theory. To address this situation, the element length error, which is an important construction error affecting the bearing performance, is considered as the factor variable and the fundamental equation of pre-stress deviation and element length error is derived firstly. Next the methods to express the pre-stress deviation, which are only derived from the active cable length errors or from both the active cable and passive cable length errors, are discussed. After that, based on the condition that the errors can be solved and compensated, the least number of monitored members is determined. Moreover, those members sensitive to cable length deviation of active cables are selected as monitored members. In order to evaluate the effect level caused by passive cable length deviation, two evaluation parameters Δ and ρ are further discussed. Finally, one cable-strut tensile structure example is employed to verify the proposed method and the results of the example studies indicate that the least necessary number of monitored members can be achieved for the accurate solution and compensation of active cable length deviations. Different members have different sensitivities to the change of the length in active cables and those members with great sensitivities can be chosen in prior as monitored members. The evaluation parameters Δ and ρ can be used to analyze the source of errors and to evaluate the error effect level caused by the passive cable length deviation.

Determination of Active Members and Zero-Stress States for Symmetric Prestressed Cable–strut Structures

Calculation of prestress distribution for large-span cable-strut tensile structures

A Feasible Symmetric State of Initial Force Design for Cable-Strut Structures

Optimal Prestress Design and Construction Technique of Cable-Strut Tension Structures with Multi-Overall Selfstress Modes

Elastified Procedure for the Form-found Equilibrium State and Zero-stress State of Cable-net Structure

Initial Pre-Stress Finding Procedure and Structural Performance Research for Levy Cable Dome Based on Linear Adjustment Theory

Selfstress mode analysis and optimal prestress design of cable-strut tension structures

Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

Study on Prestress Distribution and Structural Performance of Heptagonal Six-Five-strut Alternated Cable Dome with Inner Hole

Analysis method of cable's prestressing force correction construction for prestressed space structures

Analytical Study of Structural Conformation and Prestressing State of Drum-Shaped Honeycomb Quad-Strut Cable Dome Structure with Different Calculation Methods

Prestress design of spatial cable-truss tensile structures with annular plane

Shape-finding of large-span annular cable truss structures

Calculating of Initial Prestress for Cable-strut Tensile Structures

A Robust Method for Pre-Stress Adjustment of Cable-Strut Structures Based on Sparse Regression

Optimal Design of Cable-domes with Multi-overall Selfstress Modes

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Application and analysis of cables in light structures

Minimal Mass Design of a New Cable Truss in Two States

Shape and Force Control of Prestressed Cable-Strut Structures Based on Nonlinear Force Method

Experiment on cable tension and adjustment of truss string structure