Abstract:The pretension deviation caused by two kinds of geometrical errors, manufacturing error of member length and installation deviation of anchoring joint, is investigated for a novel crescent-shaped tensile system applied as the canopy structure in Yueqing Stadium, Zhejiang, China. The deviation of anchoring joint is transformed into the length error of radial cable, and the member length error is assumed to yield Gaussian distribution. An analytical expression, which reflects the relationship between the member length errors and pretension deviations, is deduced. A different choice of active cables leads to different sensitivity matrix in this analytical expression, which indicates theoretically that the effect for controlling pretension deviation varies with the tensioning scheme adopted in the construction. A cable truss is employed as an illustrative example to investigate the validity of this method. According to the limit values of the two kinds of geometrical errors specified in China standards, the structural pretension deviations under five tensioning schemes are calculated for the crescent-shaped tensile canopy structure. The pretension sensitivity of each member category to the geometrical errors is analyzed by comparing the relative pretension deviations. The control effects on pretension deviations are also compared for these five tensioning schemes. The results indicate that distinct pretension deviations exist in the structure if only controlling the lengths of all members or the tension forces of ring cables during construction. Stretching the upper and lower radial cables and also controlling their tension forces can prominently decrease the structural pretension deviations. However, the pretension deviations of suspenders cannot be effectively controlled for any of the five tensioning schemes. (C) 2016 Elsevier Ltd. All rights reserved.

Calculating of Initial Prestress for Cable-strut Tensile Structures

Calculation of prestress distribution for large-span cable-strut tensile structures

Initial Pre-Stress Finding Procedure and Structural Performance Research for Levy Cable Dome Based on Linear Adjustment Theory

Shape-finding of large-span annular cable truss structures

Analysis method of cable's prestressing force correction construction for prestressed space structures

Optimal Prestress Design and Construction Technique of Cable-Strut Tension Structures with Multi-Overall Selfstress Modes

A Simple Computation Method of Prestressed Space Truss and Its Global-process Pretensioning Analysis

A Fast Calculation Method for the Initial Prestress Distribution of Rib Ring Cable Dome

Analytical Study of Structural Conformation and Prestressing State of Drum-Shaped Honeycomb Quad-Strut Cable Dome Structure with Different Calculation Methods

Selfstress mode analysis and optimal prestress design of cable-strut tension structures

Mechanical Analysis of a Type of Hybrid Spatial Structure Composed of Cables, Bars and Beams

Prestress design of spatial cable-truss tensile structures with annular plane

Study on Prestress Distribution and Structural Performance of Heptagonal Six-Five-strut Alternated Cable Dome with Inner Hole

Theoretical Analysis and Experimental Study on Sensitivity of Element-Length Error in Cable-Strut Tensile Structures

A Feasible Symmetric State of Initial Force Design for Cable-Strut Structures

Numerical Analysis of the Pretension Deviations of a Novel Crescent-Shaped Tensile Canopy Structural System

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Prestress design for cable-strut structures by grouping elements

METHOD OF CABLE FORCE CONTROL DURING ACCUMULATIVE SLIDING CONSTRUCTION FOR PRETENSIONED RETICULATED STRUCTURES

Experiment on cable tension and adjustment of truss string structure

Application and analysis of cables in light structures