Abstract:Construction errors are inevitable in real cable-strut tensile structures. Nevertheless, the relevant work, especially the monitoring scheme design work, to control the construction errors is lacking. At present, the monitoring schemes always lay out the monitored members in the places with great internal force or great deformation, do not consider the method to control the construction errors and do not explain the method to lay out the monitored members in fundamental theory. To address this situation, the element length error, which is an important construction error affecting the bearing performance, is considered as the factor variable and the fundamental equation of pre-stress deviation and element length error is derived firstly. Next the methods to express the pre-stress deviation, which are only derived from the active cable length errors or from both the active cable and passive cable length errors, are discussed. After that, based on the condition that the errors can be solved and compensated, the least number of monitored members is determined. Moreover, those members sensitive to cable length deviation of active cables are selected as monitored members. In order to evaluate the effect level caused by passive cable length deviation, two evaluation parameters Δ and ρ are further discussed. Finally, one cable-strut tensile structure example is employed to verify the proposed method and the results of the example studies indicate that the least necessary number of monitored members can be achieved for the accurate solution and compensation of active cable length deviations. Different members have different sensitivities to the change of the length in active cables and those members with great sensitivities can be chosen in prior as monitored members. The evaluation parameters Δ and ρ can be used to analyze the source of errors and to evaluate the error effect level caused by the passive cable length deviation.

Optimal Prestress Design and Construction Technique of Cable-Strut Tension Structures with Multi-Overall Selfstress Modes

Selfstress mode analysis and optimal prestress design of cable-strut tension structures

Calculation of prestress distribution for large-span cable-strut tensile structures

Optimal Design of Cable-domes with Multi-overall Selfstress Modes

Prestress design of spatial cable-truss tensile structures with annular plane

Experimental research on construction of a Kiewitt dome model pre-tensioned by different schemes

Analysis method of cable's prestressing force correction construction for prestressed space structures

Initial Pre-Stress Finding Procedure and Structural Performance Research for Levy Cable Dome Based on Linear Adjustment Theory

Selfstress mode analysis and optimal design of Kiewitt domes

Robustness Analysis of a Flexible Cable-Strut Tensile Structure

Study on Prestress Distribution and Structural Performance of Heptagonal Six-Five-strut Alternated Cable Dome with Inner Hole

Theoretical Analysis and Experimental Study on Sensitivity of Element-Length Error in Cable-Strut Tensile Structures

An experimental study on large-span spatial cable-truss tensile structure model

Experimental Study on Construction Tension and Local Component Failure of Double Inner and Outer Latticed Shell String Structure

Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

Calculating of Initial Prestress for Cable-strut Tensile Structures

Application and analysis of cables in light structures

Optimal Prestress Investigation on Tensegrity Structures Using Artificial Fish Swarm Algorithm

Experiment on cable tension and adjustment of truss string structure

Prestress design for cable-strut structures by grouping elements

A Robust Method for Pre-Stress Adjustment of Cable-Strut Structures Based on Sparse Regression