Abstract:A series of cross-linkable hole-transporting materials (X-HTMs) consisting of indacenodithiophene, bithiophene, and thiophene units bookended by two triarylamine groups have been designed and synthesized to investigate their suitability as new anode buffer layer for bulk heterojunction polymer solar cells (PSCs). These X-HTMs can be thermally cross-linked at temperature between 150 and 180 C to form robust, solvent-resistant films for subsequent spin-coating of another upper layer. Energy levels of these cross-linked materials were measured by cyclic voltammetry, and the data suggest that these X-HTMs have desirable hole-collecting and electron-blocking abilities to function as an anode buffer layer for PSCs. In addition, by incorporating thiophene or fused ring units into the X-HTM backbone, it effectively improved the hole-carrier motilities. To further improve the conductivity and optical transparency for PSCs, the X-HTM films were p-doped with nitrosonium hexafluoroantimonate (NOSbF6). The doped X-HTM layers showed remarkably enhanced hole-current densities compared to neutral X-HTM under the same electric field bias. The properties of the doped X-HTM film as anode buffer layer has been investigated in PSCs. The resulting devices showed similar performance compared to those made using conducting polymer, poly(3,4-ethylene- dioxylenethiophene):poly(styrenesulfonate) (PEDOT:PSS), as the anode buffer layer. Moreover, a novel bilayer HTM structure consisting of a doped and a neutral layer was employed to exploit the feasibility of combining high conductivity from the doped X-HTM and good electron-blocking ability from the neutral X-HTM together. Interestingly, PSC devices based on this bilayer structure showed enhanced V-oc, J(sc), and FF compared to the devices with only a single-layer doped X-HTM. These results indicate that such X-HTMs are promising alternative materials to PEDOT:PSS as an anode buffer layer for polymer solar cells.

Influence of Electrode Interfacial Buffer Layers on Thermal Stability of P3HT:PC61BM Solar Cells

Dramatic improvement in the stability and mechanism of high-performance inverted polymer solar cells featuring a solution-processed buffer layer

Thermal Radiation Annealing for Overcoming Processing Temperature Limitation of Flexible Perovskite Solar Cells

Comprehensive Understanding of Heat-Induced Degradation of Triple-Cation Mixed Halide Perovskite for a Robust Solar Cell

Improving the Thermal Stability of Organic Solar Cells via Crystallinity Control

Low Temperature Aqueous Solution-Processed Zno and Polyethylenimine Ethoxylated Cathode Buffer Bilayer for High Performance Flexible Inverted Organic Solar Cells

Water‐Induced Formation of α‐MoO 3 Microcrystals as Anode Buffer Layer for Highly Efficient Polymer Solar Cells

Toward High Efficiency Organic Photovoltaic Devices With Enhanced Thermal Stability Utilizing P3ht-B-P3pht Block Copolymer Additives

Influence of Processing Parameters and Molecular Weight on the Morphology and Properties of High‐Performance PffBT4T‐2OD:PC71BM Organic Solar Cells

Thermal-Induced Performance Decay of the State-of-the-Art Polymer: Non-Fullerene Solar Cells and the Method of Suppression

Effect of Electron Collecting Metal Oxide Layer in Normal and Inverted Structure Polymer Solar Cells

Enhanced efficiency and stability of perovskite solar cells with ultra-thin Al2O3 contact interlayer via low temperature atomic layer deposition

Chemically Doped and Cross-Linked Hole-Transporting Materials As an Efficient Anode Buffer Layer for Polymer Solar Cells

Enhancing Thermal Stability of Perovskite Solar Cells through Thermal Transition and Thin Film Crystallization Engineering of Polymeric Hole Transport Layers

Research Progress of Buffer Layer and Encapsulation Layer Prepared by Atomic Layer Deposition to Improve the Stability of Perovskite Solar Cells

Improving the Stability of Bulk Heterojunction Solar Cells by Incorporating Ph-Neutral PEDOT:PSS As the Hole Transport Layer.

Improving Electron Extraction Ability and Device Stability of Perovskite Solar Cells Using a Compatible PCBM/AZO Electron Transporting Bilayer.

Enhanced stability of low temperature processed perovskite solar cells via augmented polaronic intensity of hole transporting layer

Enhancement Mechanisms of the Power Conversion Efficiency for the P3HT:PCBM Bulk Heterojunction Solar Cells with a LiF Cathode Buffer Layer Due to Thermal Annealing

Interface-induced crystalline ordering and favorable morphology for efficient annealing-free poly(3-hexylthiophene): fullerene derivative solar cells.

Substrate Modifications for Stability Improvements of Flexible Perovskite Solar Cells