Abstract:Magnetic nanoparticles and thin films exhibiting a large magnetic anisotropy energy density (MAE) have attracted enormous attention over the last years due to their potential use in magnetic data storage or sensing applications. FePt alloy nanoparticles and films have a huge MAE in the chemically ordered L10 phase. This ordered phase is typically obtained by annealing the as-prepared chemically disordered fcc FePt nanoparticles at temperatures above 600°C. Besides standard colloidal approaches [1], such fcc FePt nanoparticles can be fabricated by a micellar technique resulting in regular arrays on various substrates [2,3]. This approach offers the advantage that the interparticle distance can be tuned between 20-100 nm. Due to the larger separation particle agglomeration can be avoided during the annealing induced transformation into the L10 phase. Moreover, the particles are magnetostatically decoupled. We investigated the formation of the L10 phase for 2-10 nm FePt particles as a function of the annealing temperature and time on Si/SiOx substrates. Hysteresis loops at T = 15K reveal strongly enhanced coercive field after an annealing step at 700°C for 30 min compared to the as-prepared particles. The effective MAE is found to be 1-2×10 J/m using simple Stoner-Wohlfarth modeling that is a factor of 3-5 smaller than the FePt bulk MAE. In order to correlate the magnetic properties to the structure of the particles we performed transmission electron microscopy (TEM) investigations of FePt particles on both, Si/SiOx and MgO(001) substrates. Basically, the lowered MAE could originate from defective crystal structures, imperfect ordering of Feand Pt-planes (chemical ordering parameter), and/or inhomogeneous segregation of Fe/Pt within the particles. The applied TEM methods included conventional TEM (bright-field, dark-field, electron diffraction), spherical aberration corrected high resolution imaging and scanning TEM (Z-contrast). It was found that most particles contain defects such as stacking faults and multiple twins (Figure 1). Calculated TEM images based on various models of FePt nanoparticles (Figure 2) were generated and compared to experimental images especially to analyze and to determine the chemical ordering parameter of the L10 phase, crystal structure and defects.

Epitaxial Growth Micro-Structure and Magnetic Studies of Fept Nanoparticles: Mgo Multi-Layer Composite Thin Films

The Structural Evolution in the Growth Process of FePt Embedded in MgO Matrix

Microstructure and Magnetic Properties of Fept-Mgo Granular Thin Films Fabricated by Co-Sputtering Method on the Single Crystal Mgo Substrate.

Growth and Optical Properties of FePt:BaTiO3nanocomposite Films

Structural and magnetic properties of nanostructured FePt/MgO granular films

Microstructure and Magnetic Properties of L10 FePt–MgO/Fe–MgO Thin Films

Structural and Magnetic Investigations on FePt Nanoparticles

Magnetic and Structural Properties of Fe X Pt 100− X on MgO(110) Substrates

Fabrication and magnetic properties of FePt nanoparticle assemblies embedded in MgO-matrix systems

Investigation on the microstructure and magnetic properties of FePt films prepared by sequentially sputtering

Microstructural and magnetic properties of L1 0 FePt C (0 0 1) textured nanocomposite films grown on different intermediate layers

Grain Size Refining and Microstructure of Fept/Mgo Nanogranular Thin Films

Microstructure and Magnetic Properties of (001)-Oriented L10 FePt Films: Role of Ag Underlayer and Fe/Pt Ratio

Growth and Magnetism of Ultrathin Fe Films on Pt(100)

Structure and Magnetic Properties of Graded (001)-Oriented FePt Films Prepared by Magnetron Sputtering and Rapid Thermal Annealing

Magnetic properties and microstructure of L10-FePt/AlN perpendicular nanocomposite films

L10 FePt films epitaxially grown on MgO substrates with or without a Cr underlayer

Composition Influence on the Microstructures and Magnetic Properties of Fept Thin Films

Microstructural and magnetic properties of L1<sub>0</sub>FePt–C (0 0 1) textured nanocomposite films grown on different intermediate layers

Epitaxial growth of Fe3O4 thin films on ZnO and MgO substrates

Growth of Mixed Phased Films of Γ-Fe2o3and Half Metallic Fe3O4using (100) MgO/Fe under Layer for Spin Electronic Devices