Abstract:The electromagnetic cold crucible (EMCC) technique is an effective method to melt and directionally solidify reactive and high-temperature materials without contamination. The temperature field and fluid flow induced by the electromagnetic field are very important for melting and controlling the microstructure. In this article, a 3D EMCC model for calculating the magnetic field in the charges (TiAl alloys) using the T-Ω finite element method was established and verified. Magnetic fields in the charge under different electrical parameters, positions and dimensions of the charge were calculated and analyzed. The calculated results show that the magnetic field concentrates in the skin layer, and the magnetic flux density (B) increases with increasing of the frequency, charge diameter and current. The maximum B in the charge is affected by the position of the charge in EMCC (h 1) and the charge height (h 2), which emerges at the middle of coils (h c) when the relationship of h c < h 1 + h 2 < h c + δ is satisfied. Lower frequency and smaller charge diameter can improve the uniformity of the magnetic field in the charge. Consequently, the induced uniform electromagnetic stirring weakens the turbulence and improves temperature uniformity in the vicinity of the solid/liquid (S/L) interface, which is beneficial to forming a planar S/L interface during directional solidification. Based on the above conclusions, the TiAlNb alloy was successfully melted with lower power consumption and directionally solidified by the square EMCC.

Numerical Simulation of Liguid Alloy Flow Field During Solidification under Applied Pulsed Magnetic Fields

Numerical Simulation of Solidification under Pulsed Magnetic Fields

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Numerical Simulation of Electromagnetic Phenomena and Solidification under a Pulsed Magnetic Field

Numerical Simulation on Fluid Flow, Heat and Mass Transfer in Solidification of Fe-C Alloys

Numerical Study on Solidification Characteristics under Pulsed Magnetic Field

Numerical Calculation of Flow Field Inside TiAl Melt During Rectangular Cold Crucible Directional Solidification

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Phase Field Simulation of Multiple Phase Transformation of Fe-C Alloy During Solidification Process

Simulation on Solidification of an Al-Ni Alloy under Electromagnetic Stirring

Numerical simulation of the casting process of an AZ91D magnesium alloy under a rotating-pulsed combined electromagnetic field

Numerical Simulation of Electro-Magnetic and Flow Fields of Tial Melt under Electric Field

Computer Simulation of Solidification Transport Behaviours in Blade-Like Castings under Transverse Static Magnetic Fields Up to 25T

Numerical Simulation of Filling and Solidification Processes for Magnesium Alloy in Low Pressure Cast Process

Numerical and experimental studies on solidification of AZ80 magnesium alloy under out-of-phase pulsed magnetic field

Three Dimensional Numerical Simulation of Solidification Microstructure of Single Phase Alloy

Numerical Research on Magnetic Field, Temperature Field and Flow Field During Melting and Directionally Solidifying TiAl Alloys by Electromagnetic Cold Crucible

Numerical Simulation of Effect of Pulling Velocity on Structure Evolution During Directional Solidification of Ti-45Al Alloy

Numerical simulation of the effect of ultra-strong transverse static magnetic field upon the solidification transport behaviors of Ti alloy casting

Numerical Sirnulation of Heat, Mass and Momentum Transport Behaviours in Directionally Solidifying Alloy Castings under Electromagnetic Fields Using an Extended Direct-Simple Scheme

Numerical simulation of the semi-solid ZL104 alloy prepared by electromagnetic stirring process