Abstract:Poly(L‐lactide) (PLLA), poly(D‐lactide) (PDLA) and poly(methyl methacrylate) (PMMA) are melt blending with various content of PDLA (0 and 3 wt%) and PMMA (0–20 wt%). The blending pellets then undergoes the melt spinning and hot drawing process to prepare PLA composite fibers. The hydrolysis resistance of fibers is improved by the addition of PMMA and the mechanical property and heat resistance properties increased for the highly oriented crystalline morphology induced by the stereocomplex crystals (SC), which have formed in PLLA/PDLA/PMMA fibers. The SC nanofibrils are detected from the surface morphology of PLLA/PDLA/PMMA fibers after hydrolysis at 60°C for 132 h in NaOH solution. Polylactic acid/poly(methyl methacrylate) (PLA/PMMA) composite fibers with high performance were fabricated using melt spinning technique. The crystallization, lamellae orientation and physical properties of composite fibers were investigated systematically. The addition of PMMA (0–20 wt%) has improved the hydrolysis resistance of composite fibers by preventing water molecules from penetrating and diffusing through the fibers, but the strength and heat resistance were reduced at the same time. The stereocomplex crystallites (SC) formed before spinning by introducing poly(D‐lactide) (PDLA) (3 wt%) in poly(L‐lactide) (PLLA) matrix and acted as nucleating agents to enhanced the crystallization and lamellae orientation of PLLA matrix, which improved the physical properties of PLA composite fibers resultful. The tensile strength of PLA fibers with 3 wt% PDLA and 5 wt% PMMA was increased 31% as well as the boiling water shrinkage and the hydrolysis rate were decreased 30% and 33% in relation to PLLA fibers. Finally, the hydrolysis resistance was further enhanced on the basis of realizing high strength and heat resistance, which is of great significance for preparing durable PLA fiber materials and expanding their application.

Interaction of Lignosulfonate Calcium and Polyvinyl Alcohol and the Performance of the Blending Material

Blending Effects on Polymorphic Crystallization of Poly(l-lactide)

Competing Stereocomplexation and Homocrystallization of Poly(l-lactic Acid)/poly(d-Lactic Acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Miscibility, Crystallization and Morphology in the Novel Polylactide/Poly(4-hydroxybutyrate) Blends

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Studies on Poly (vinyl alcohol)/Layered Double Hydroxide in situ Composite Films

Tensile properties and deformation by different compatibilizers in bio-based polylactide/poly(4-hydroxybutyrate) blends

Enhancing Crystallization Behavior for Optimized Performances of Poly(tmc‐b‐(lla‐ran‐ga)) by PDLA/PLLA Stereocomplex Crystallization

Toward durable polylactic acid/poly(methyl methacrylate) polyblend fibers with high performance

Miscibility and Crystallinity Study of Poly(vinylidene Fluoride) / Poly(L-Lactic Acid) Polymer Blend

Polyglycerol‐modified polyvinyl alcohol with improved stability during thermoplastic processing

Impact of aromatic sulfonate derivative on the crystallization, thermal resistance, and hydrolytic properties of poly(lactic acid)

Preparation and characterization of poly(vinyl alcohol)/poly(lactic acid) blends containing bio‐based plasticizers

Improvement of PLLA Ductility by Blending with PVDF: Localization of Compatibilizers at Interface and Its Glycidyl Methacrylate Content Dependency

Polymorphic Crystallization and Crystalline Reorganization of Poly(l-lactic acid)/Poly(d-lactic acid) Racemic Mixture Influenced by Blending with Poly(vinylidene fluoride)

Effect of Poly (3-hydroxybutyrate-co-3-hydroxyhexanoate) on the Crystalline Properties of Poly (L-lactic acid)

Enhanced mechanical property and water solubility of polyvinyl alcohol film via constructing hydrogen-bond network by adding carboxymethyl chitosan

Enhanced Toughness of PLLA/PCL Blends Using Poly(d-Lactide)-poly(ε-caprolactone)-poly(d-lactide) As Compatibilizer

A feasible strategy to balance the performance of stereo-complexed polylactide by incorporating poly(butylene adipate-co-terephthalate)

Enhanced hydrophilicity of low melting point polylactic acid by butenediol vinyl alcohol copolymer via melt blending