Abstract:In order to surmount the Shockley–Queisser efficiency barrier of single-junction solar devices, tandem solar cells (TSCs) have shown a potential solution. Organic and Si materials can be promising candidates for the front and rear cells in TSCs due to their non-toxicity, cost-effectiveness, and possible complementary bandgap properties. This study researches a flexible two-terminal (2-T) organic/Si TSC through TCAD simulation. In the proposed configuration, the organic solar cell (OSC), with a photoactive optical bandgap of 1.78 eV, serves as the front cell, while the rear cell comprises a Si cell based on a thin 70 μm wafer, with a bandgap energy of 1.12 eV. The individual standalone front and bottom cells, upon calibration, demonstrate power conversion efficiencies (PCEs) of 11.11% and 22.69%, respectively. When integrated into a 2-T organic/Si monolithic TSC, the resultant tandem cell achieves a PCE of 20.03%, indicating the need for optimization of the top organic cell to beat the efficiency of the bottom Si cell. To enhance the performance of the OSC, some design ideas are presented. Firstly, the OSC is designed by omitting the organic hole transport layer (HTL). Consequently, through engineering the front contact work function, the PCE is enhanced. Moreover, the influence of varying the absorber defect density of the top cell on TSC performance is investigated. Reduced defect density led to an overall efficiency improvement of the tandem cell to 23.27%. Additionally, the effects of the variation of the absorber thicknesses of the top and rear cells on TSC performance metrics are explored. With the matching condition design, the tandem efficiency is enhanced to 27.60%, with VOC = 1.81 V and JSC = 19.28 mA/cm2. The presented simulation results intimate that the OSC/Si tandem design can find applications in wearable electronics due to their flexibility, environmentally friendly design, and high efficiency.

Organic Tandem Cells with PCE over 17%

Toward high-efficiency solution-processed tandem solar cells

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process

Tandem Organic Solar Cell with 20.2% Efficiency

Tandem organic solar cells with 18.67% efficiency via the careful subcell design and selection

Toward Efficient Tandem Organic Solar Cells: From Materials to Device Engineering

Proposal and Design of Organic/CIGS Tandem Solar Cell: Unveiling Optoelectronic Approaches for Enhanced Photovoltaic Performance

A Tandem Organic Photovoltaic Cell with 19.6% Efficiency Enabled by Light Distribution Control

Combination of Highly Photovoltaic and Highly Transparent Materials Enables Record Performance Semitransparent Organic Solar Cells

Tandem Organic Solar Cells with 18.7% Efficiency Enabled by Suppressing the Charge Recombination in Front Sub‐Cell

Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses

High Efficiency Non-fullerene Organic Tandem Photovoltaics Based on Ternary Blend Subcells

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Efficient Organic Tandem Solar Cells Enabled by Solution‐Processed Interconnection Layer and Fine‐Tuned Active Layer

TCAD-Based Design and Optimization of Flexible Organic/Si Tandem Solar Cells

Non‐Halogenated‐Solvent Processed and Additive‐Free Tandem Organic Solar Cell with Efficiency Reaching 16.67%

Efficient Tandem Organic Photovoltaics with Tunable Rear Sub-cells

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

Tandem Organic Solar Cells: Nonfullerene Tandem Organic Solar Cells with High Open‐Circuit Voltage of 1.97 V (adv. Mater. 44/2016)

Boosting the Efficiency of Perovskite/Organic Tandem Solar Cells via Enhanced Near‐Infrared Absorption and Minimized Energy Losses