Low Profile Reflective Polarization Conversion Metasurface With High Frequency Selectivity
Yu-Tong Zhao,Jun-Jie Zhang,Bian Wu
DOI: https://doi.org/10.1109/tap.2022.3187524
IF: 5.7
2022-11-18
IEEE Transactions on Antennas and Propagation
Abstract:In this article, a multilayer reflective polarization conversion metasurface with both high-frequency selectivity and low profile is proposed. The frequency selective polarization conversion metasurface (FSPCM) is composed of four metal layers separated by three substrates. The cross-shaped patch on the top layer is connected to the folded microstrip line on the bottom layer with two via holes through the circle slots inside two ground layers, which converts the linearly polarized electromagnetic incident wave into cross-polarized wave after reflection. The second-order response can extend to the third-order response by introducing a coupled half-wavelength microstrip resonator on the bottom metal layer, which achieves high-frequency selectivity with a transmission zero and high polarization conversion rate (PCR) without increasing the thickness. The equivalent circuit analysis, structure simulation, and experimental demonstration are conducted in detail; the frequency selectivity of the fabricated FSPCM at the lower and upper band edge is 94 and 192 dB/GHz, respectively; PCR is more than 97% from 4.85 to 5.12 GHz, and the thickness is only , where is the free space wavelength at the center operating frequency. Our findings pave a new way for enhancing the anti-interference capability and electromagnetic compatibility in applications of communication system, microwave imaging, and stealth technology.
telecommunications,engineering, electrical & electronic