Abstract:This work presents a novel tri-band bandpass frequency selective surface (FSS) that achieves high-order filtering responses in different frequency bands by means of a complementary structure. The proposed FSS is composed of three metal periodic arrays, which are separated by multilayer dielectric substrates. The gridded-double convoluted loop (G-DCL) structure, which is the middle layer structure, is a hybrid resonator that generates different resonant frequencies. The top and bottom layer structures are designed as complementary structures to the middle layer. To accurately describe the frequency responses, an equivalent circuit model (ECM) has been constructed over the entire band from 0 to 16 GHz. The results of the simulation indicate that the developed FSS can generate three pass-bands operating at 3.79 GHz, 8.34 GHz, and 12.52 GHz, respectively, and − 3 dB fractional bandwidths are 52.8%, 13.7%, and 19.7%. The transmission responses at the edges of each passband show a quick roll-off from the passband to the stopband, and there is significant out-of-band suppression between adjacent passbands. Moreover, the FSS maintains excellent angular and polarization stability within a 50° range. For verification, the tri-band FSS has been fabricated and tested. The experimental results match the simulation results, validating the accuracy of the FSS design.

High-Selectivity Circularly Polarized Frequency Selective Surface with Ultralow Profile and Continuous Phase Modulation

A Novel Dual-Band Frequency Selective Surface (FSS)

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

A Novel Frequency Selective Surface with Smaller Size and Wide Band

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Single- and Dual-Band High-Order Polarization Rotating Frequency Selective Surface

Dual-Band High Selective Frequency Selective Surface Design and Analysis

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

A Modified High-Selective Frequency Selective Surface Designed by Multilevel Green's Function Interpolation Method

Design of a Dual-Band Dual-Polarization Transparent Frequency Selective Surface

A Dual-Band Dual-Polarization Frequency Selective Surface with Wide-Range Flexible Band Ratio and Wide Angular Stability

A Quad-Band Frequency Selective Surface with Highly Selective Characteristics

An Ultrathin and Polarization-Insensitive Frequency Selective Surface at Ka-Band

A Dual-Polarized Bandpass Frequency Selective Surface With Stable Response

Design and analysis of a complementary structure-based high selectivity tri-band frequency selective surface

Frequency Selective Surface With Quasi-Elliptic Bandpass Response Using Radiation Null of Patch Antenna

Low‐profile Frequency Selective Surface with Quasi‐elliptical Bandpass Response Using Antenna‐filter‐antenna Approach

A Miniaturized Ultra-Wideband Dual Bandpass Frequency Selective Surface with High Selectivity