Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

Design and Fabrication of a Nanoamorphous Interface Layer in B4C/Al Composites to Improve Hot Deformability and Corrosion Resistance

Simultaneously Increasing the Mechanical Properties and Corrosion Resistance of B4C/Al 4 C/Al Composites Via Forming "Tio2-Al" 2-Al" Interfacial Layer

Simultaneously Increasing the Mechanical Properties and Corrosion Resistance of B4C/Al Composites Via Forming “tio2–al” Interfacial Layer

Enhanced Ductility of B4C/Al Composites by Controlling Thickness of Interfacial Oxide Layer Through High Temperature Oxidation of B4C Particles

Enhanced Ductility by Controlling Thickness of Interfacial Oxide Layer in B4c/Al Composites

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Revealing corrosion behavior of B4C/pure Al composite at different interfaces between B4C particles and Al matrix in NaCl electrolyte

Research on Low Flow Stress and Quantitative DRX Analysis in B4C/Al Composites with Interfacial Amorphous B2O3 Layer

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Strengthened High-Temperature Resistance in B4C/SiC/2024Al Composite Via SiC Nanowires Pinning Grain Boundary

Improvement on Mechanical Property of B4C/Al Composites by Addition of Ti Through Interfacial Reaction

Corrosion Onset Associated with the Reinforcement and Secondary Phases in B4C-6061Al Neutron Absorber Material in H3BO3 Solution

Microstructure and Mechanical Properties of Al–B 4 C Composite at Elevated Temperature Strengthened with in Situ Al 2 O 3 Network

Exploring the mechanical and structural properties of B 4 C/ZrO 2 strengthened Al-Mg-Cr alloy hybrid composites

The design of a novel neutron shielding B4C/Al composite containing Gd

Research on Microstructure and Mechanical Properties of B<sub>4</sub>C/Al Composites by Liquid Mental Mixing

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

High-performance B4C matrix composites fabricated from the B4C–Si–CeO2 system via reactive hot pressing

Thermally Stable Microstructures and Mechanical Properties of B 4 C-Al Composite with In-Situ Formed Mg（Al）B 2

In-situ synthesis of Al3BC/Al composites from amorphous boron and graphene nanoplates by solid reaction

Influence of particulate B4C size on microstructural evolution and mechanical behavior in nanostructured Al matrix during heat treatment