Abstract:In the present work, a novel poly(arylene ether ketone) with a unique molecular design that included concentrated flexible sulfoalkyl groups and a silane cross-linked network (C-SPAEK) was prepared and used as a PEM for DMFCs. The chemical structures, sulfonation degree and phase-separated morphology were characterized and identified by 1 H NMR, FT-IR and SAXS. The resulting copolymers exhibited excellent thermal stability (T 5% >263.8 °C) and mechanical properties (tensile strength>52.88 MPa). Additionally, the high IEC values and obvious hydrophilic/hydrophobic phase-separated structure (d > 2.71 nm) ensured that the C-SPAEK membranes possessed high proton conductivities . The C-SPAEK PEMs also displayed enhanced methanol resistance and dimensional stability, which were much better than those of a recast Nafion membrane under the same conditions. The C-SPAEK-0.4 membrane maintained a low methanol absorption of less than 48.7%, even in 4 M methanol solution. In particular, the C-SPAEK-0.6 membrane exhibited the best comprehensive performance, with a high proton conductivity (0.164 S cm −1 ), low methanol uptake (52.1%) and permeability (3.63 × 10 −7 cm 2 s −1 ), and maximum power density (83.2 mW cm −2 ), when immersed in 2 M methanol at 80 °C in a DMFC single-cell. These results suggested that the C-SPAEK membranes were sufficiently tough and had the potential to overcome the problems caused by the high methanol permeability of PEMs. The unique molecular design of C-SPAEK guaranteed a rare combination of high proton conductivity and enhanced methanol resistance, which are the key determining factors for DMFC applications.

High Dimensional Stability and Alcohol Resistance Aromatic Poly(aryl Ether Ketone) Polyelectrolyte Membrane Synthesis and Characterization

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Silane cross-linked network and concentrated flexible sulfoalkyl groups for forming a novel C-SPAEK membrane with enhanced methanol resistance and proton conductivity for DMFC applications

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Design of a stable and methanol resistant membrane with cross-linked multilayered polyelectrolyte complexes for direct methanol fuel cells

Covalently and ionically crosslinked sulfonated poly(arylene ether ketone)s as proton exchange membranes

Novel side-chain-type sulfonated poly(arylene ether ketone) with pendant sulfoalkyl groups for direct methanol fuel cells

Preparation and DMFC performance of a sulfophenylated poly(arylene ether ketone) polymer electrolyte membrane

Novel Sulfonated Poly(ether Ether Ketone Ketone)s for Direct Methanol Fuel Cells Usage: Synthesis, Water Uptake, Methanol Diffusion Coefficient and Proton Conductivity

Structural optimization and performance trade-off strategies for semi-crystalline sulfonated poly(arylene ether ketone) membranes in high-concentration direct methanol fuel cells

Sulfonated Poly(phthalazinone Ether Ketone) for Proton Exchange Membranes in Direct Methanol Fuel Cells

A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells

Naphthalene‐based Poly(arylene Ether Ketone) Copolymers Containing Sulfobutyl Pendant Groups for Proton Exchange Membranes

Characterization of Polyethylene-Graft-Sulfonated Polyarylsulfone Proton Exchange Membranes for Direct Methanol Fuel Cell Applications

Synthesis and Characterization of A New Type of Sulfonated Poly(Ether Ether Ketone Ketone)S for Proton Exchange Membranes

Preparation and Properties of Novel Cross-Linked Sulfonated Poly(arylene Ether Ketone) for Direct Methanol Fuel Cell Application

Synthesis and characterization of poly(arylene ether ketone)s bearing pendant sulfonic acid groups for proton exchange membrane materials

Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications