Abstract:There are three difficulties in the topology optimization problem of continuum structure:1) The problem under multiple load case is not easy to be approached than that under single load case, because the former becomes a multiple objective problem on the basis of compliance objective function. 2) The problem with local constraints, such as elemental stress limit, is not easy to be solved than that with global constraints, such as displacement or frequency limits, because sensitivity analysis of the former has too expensive computation. 3) The problem with a phenomenon of ill-conditioned load, which is similar to ill-conditioned stiffness matrix in the structural analysis, is not easy to get reasonable final topological structure, because the former is difficult to consider different influences between the loads with small forces and the loads with big forces, and some of topology paths of transferring small forces may disappear during the process of iteration. To overcome the above difficulties, some measures are adopted as follows:1) Topology optimization model is established by independent continuous mapping (ICM) method. 2) Based on the von Mises criteria in theory of elastic failure, all element’ s stress constraints are transformed into a structural energy constraint, namely, a global constraint substitutes for lots of local constraints. 3) The phenomenon of the ill-conditioned load is divided into three cases: (a) Ill-condition exists between load cases, but not within each load case; (b) Ill-condition exists within some load case; (c) Ill-condition exists not only between load cases, but also within some load case. (4) A strategy based on strain energy is proposed to adopt ICM method with stress globalization, and the problems of the three cases of ill-conditioned load mentioned above are solved in term of different complementary approaches one by one. Numerical examples show that the topology path of transferring forces can be obtained more easily by substituting global strain energy constraints for local stresses constraints, and the problem of ill-conditioned load can be solved well by the weighting method which takes structural energy as weighting coefficient.

Topology Optimization of Elastic Contact Problems with Friction Using Efficient Adjoint Sensitivity Analysis with Load Increment Reduction

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Topology Optimization with Frictional Self-Contact

Reliability-Based Topology Optimization of Thermo-Elastic Structures with Stress Constraint

Isogeometric Topology Optimization (ITO) of Fiber Reinforced Composite Structures Considering Stress Constraint and Load Uncertainties

Topology optimization of self-contacting structures

Exploiting Lagrange duality for topology optimization with frictionless unilateral contact

Adjoint Design Sensitivity Analysis and Optimization of Nonlinear Structures Using Geometrical Mapping Approach

Level set shape and topology optimization of finite strain bilateral contact problems

Topology optimization for transient thermoelastic structures under time-dependent loads

Topology optimization of multi-material structures considering a piecewise interface stress constraint

Multi-material topology optimization of adhesive backing layers via J-integral and strain energy minimizations

Level-Set-Based Topology Optimization of a Geometrically Nonlinear Structure Considering Thermo-mechanical Coupling Effect

Topology optimization for enhanced dynamic fracture resistance of structures

Uncertainty‐oriented thermoelastic topology optimization with stress constraint

A simple and versatile topology optimization formulation for flexure synthesis

Multi-Material Topology Optimization of Thermo-Elastic Structures with Stress Constraint

Stress-constrained continuum topology optimization: a new approach based on elasto-plasticity

Topology Optimization of Continuum Structure With Globalization of Stress Constraints

Transient stress-constrained topology optimization of impacted structures