Abstract:There are three difficulties in the topology optimization problem of continuum structure:1) The problem under multiple load case is not easy to be approached than that under single load case, because the former becomes a multiple objective problem on the basis of compliance objective function. 2) The problem with local constraints, such as elemental stress limit, is not easy to be solved than that with global constraints, such as displacement or frequency limits, because sensitivity analysis of the former has too expensive computation. 3) The problem with a phenomenon of ill-conditioned load, which is similar to ill-conditioned stiffness matrix in the structural analysis, is not easy to get reasonable final topological structure, because the former is difficult to consider different influences between the loads with small forces and the loads with big forces, and some of topology paths of transferring small forces may disappear during the process of iteration. To overcome the above difficulties, some measures are adopted as follows:1) Topology optimization model is established by independent continuous mapping (ICM) method. 2) Based on the von Mises criteria in theory of elastic failure, all element’ s stress constraints are transformed into a structural energy constraint, namely, a global constraint substitutes for lots of local constraints. 3) The phenomenon of the ill-conditioned load is divided into three cases: (a) Ill-condition exists between load cases, but not within each load case; (b) Ill-condition exists within some load case; (c) Ill-condition exists not only between load cases, but also within some load case. (4) A strategy based on strain energy is proposed to adopt ICM method with stress globalization, and the problems of the three cases of ill-conditioned load mentioned above are solved in term of different complementary approaches one by one. Numerical examples show that the topology path of transferring forces can be obtained more easily by substituting global strain energy constraints for local stresses constraints, and the problem of ill-conditioned load can be solved well by the weighting method which takes structural energy as weighting coefficient.

Level-Set-Based Topology Optimization of a Geometrically Nonlinear Structure Considering Thermo-mechanical Coupling Effect

Structural Topology Optimization Using a Level Set Method with Finite Difference Updating Scheme

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

A stabilized parametric level-set XFEM topology optimization method for thermal-fluid problem

Level-set topology optimization considering nonlinear thermoelasticity

Level set shape and topology optimization of finite strain bilateral contact problems

Topology Optimization of Continuum Structure With Globalization of Stress Constraints

Thermo‐elastic topology optimization with stress and temperature constraints

The Path-Engulfment Method for Topology Optimization of Structures

Application of Virtual Laminated Element in the Topology Optimization of Structures

Topology Optimization of Hyperelastic Structure Based on a Directly Coupled Finite Element and Element-Free Galerkin Method

Multi-Material Topology Optimization of Thermo-Elastic Structures with Stress Constraint

Topology optimization for transient thermoelastic structures under time-dependent loads

Topology Optimization for Stable Non-Linear Structures

Topology Optimization of Structures with Coupled Finite Element – Element-free Galerkin Method

Finite Strain Topology Optimization with Nonlinear Stability Constraints

Reliability-Based Topology Optimization of Thermo-Elastic Structures with Stress Constraint

Multi-objective topology optimization for thermo-elastic systems based on periodic constraints

Parameterized level set method based topology optimization of transient heat conduction structures

A Variational Binary Level Set Method for Structural Topology Optimization