Abstract:There are three difficulties in the topology optimization problem of continuum structure:1) The problem under multiple load case is not easy to be approached than that under single load case, because the former becomes a multiple objective problem on the basis of compliance objective function. 2) The problem with local constraints, such as elemental stress limit, is not easy to be solved than that with global constraints, such as displacement or frequency limits, because sensitivity analysis of the former has too expensive computation. 3) The problem with a phenomenon of ill-conditioned load, which is similar to ill-conditioned stiffness matrix in the structural analysis, is not easy to get reasonable final topological structure, because the former is difficult to consider different influences between the loads with small forces and the loads with big forces, and some of topology paths of transferring small forces may disappear during the process of iteration. To overcome the above difficulties, some measures are adopted as follows:1) Topology optimization model is established by independent continuous mapping (ICM) method. 2) Based on the von Mises criteria in theory of elastic failure, all element’ s stress constraints are transformed into a structural energy constraint, namely, a global constraint substitutes for lots of local constraints. 3) The phenomenon of the ill-conditioned load is divided into three cases: (a) Ill-condition exists between load cases, but not within each load case; (b) Ill-condition exists within some load case; (c) Ill-condition exists not only between load cases, but also within some load case. (4) A strategy based on strain energy is proposed to adopt ICM method with stress globalization, and the problems of the three cases of ill-conditioned load mentioned above are solved in term of different complementary approaches one by one. Numerical examples show that the topology path of transferring forces can be obtained more easily by substituting global strain energy constraints for local stresses constraints, and the problem of ill-conditioned load can be solved well by the weighting method which takes structural energy as weighting coefficient.

Transient stress-constrained topology optimization of impacted structures

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Topology optimization for transient response of structures subjected to dynamic loads

Topology optimization for transient thermoelastic structures under time-dependent loads

The Path-Engulfment Method for Topology Optimization of Structures

Topology Optimization of Continuum Structure With Globalization of Stress Constraints

Topology optimization of transient problem with maximum dynamic response constraint using SOAR scheme

Toward static and transient stress-constrained topology optimization for shell-infill structures

TOPOLOGICAL OPTIMIZATION OF CONTINUUM STRUCTURE UNDER THE STRATEGY OF GLOBALIZATION OF STRESS CONSTRAINTS

An efficient transient dynamic topology optimization framework based on successive iteration of analysis and design

Reliability-Based Topology Optimization of Thermo-Elastic Structures with Stress Constraint

Stress-constrained continuum topology optimization: a new approach based on elasto-plasticity

Topology optimization for energy absorption of quasi-brittle structures undergoing dynamic fractures

TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURE WITH GLOBALIZATION OF STRESS CONSTRAINTS BY ICM METHOD

Topology optimization for enhanced dynamic fracture resistance of structures

Topology Optimization Design of Continuum Structures under Stress and Displacement Constraints

Topology optimization for minimum stress design with embedded movable holes

Robust topology optimization for transient dynamic response minimization

Uncertainty‐oriented thermoelastic topology optimization with stress constraint

Topology Optimization Considering Stress and Reliability Constraints