Abstract:Fine chemicals produced via batch crystallization with properties dependent on the crystal size distribution require precise control of supersaturation, which drives the evolution of crystal size over time. Model predictive control (MPC) of supersaturation using a mechanistic model to represent the behavior of a crystallization process requires less experimental time and resources compared with fully empirical model-based control methods. Experimental characterization of the hexamine-ethanol crystallization system was performed in order to collect the parameters required to build a one-dimensional (1D) population balance model (PBM) in gPROMS FormulatedProducts software (Siemens-PSE Ltd.). Analysis of the metastable zone width (MSZW) and a series of seeded batch cooling crystallizations informed the suitable process conditions selected for supersaturation control experiments. The gPROMS model was integrated with the control software PharmaMV (Perceptive Engineering Ltd.) to create a digital twin of the crystallizer. Simulated batch crystallizations were used to train two statistical MPC blocks, allowing for in silico supersaturation control simulations to develop an effective control strategy. In the supersaturation set-point range of 0.012-0.036, the digital twin displayed excellent performance that would require minimal controller tuning to steady out any instabilities. The MPC strategy was implemented on a physical 500 mL crystallizer, with the simulated solution concentration replaced by in situ measurements from calibrated attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. Physical supersaturation control performance was slightly more unstable than the in silico tests, which is consistent with expected disturbances to the heat transfer, which were not specifically modeled in simulations. Overall, the level of supersaturation control in a real crystallizer was found to be accurate and precise enough to consider future adaptations to the MPC strategy for more advanced control objectives, such as the crystal size.

Simulation and Experimental Investigation of a Novel Supersaturation Feedback Control Strategy for Cooling Crystallization in Semi-Batch Implementation

Novel semibatch supersaturation control approach for the cooling crystallization of heat-sensitive materials

Thermodynamic Polymorph Selection in Enantiotropic Systems Using Supersaturation-Controlled Batch and Semibatch Cooling Crystallization

Development of a Digital Twin for the Prediction and Control of Supersaturation during Batch Cooling Crystallization

Closed-loop Control of Crystal Shape in Seeded Cooling Crystallisation Experiments

Supersaturation Tracking for the Development, Optimization and Control of Crystallization Processes

A Modified Method for Modelling, Optimization and Control of an Anti-Solvent Crystallization Process

Computational Fluid Dynamics Modeling of the Precipitation Process in a Semibatch Crystallizer

Simulation of a batch crystallizer using a multi-scale approach in time and space

Membrane Assisted Cooling Crystallization: Process Model, Nucleation, Metastable Zone, and Crystal Size Distribution

Machine Learning Modeling and Predictive Control of the Batch Crystallization Process

Optimization of an Oscillatory Flow Crystallizer Based on Heat Transfer and Supersaturation Distribution

Use of Wet Milling Combined with Temperature Cycling to Minimize Crystal Agglomeration in a Sequential Antisolvent-Cooling Crystallization

Automated Direct Nucleation Control in Continuous Mixed Suspension Mixed Product Removal Cooling Crystallization

Optional Operation of Batch Crystallization

Fluid Dynamic and Heat Transfer Simulations of Solid Hollow Fiber Cooling Crystallizer for Continuous Synthesis of Drug Nanoparticles

Feedback Supersaturation Control Crystallization Process of Itaconic Acid

Multiscale Modeling and Simulation of Macromixing, Micromixing, and Crystal Size Distribution in Radial Mixers/Crystallizers

Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer

Control of Crystal Size Distribution using Non-Isothermal Taylor Vortex Flow

Modeling and dynamic simulation of batch crystallization process