Abstract:Supersaturation control (SSC) is a simple yet effective technique to control, among other properties, the purity, shape, and polymorphic form of crystals during the crystallization process. However, for the enantiotropic polymorph systems it is difficult to efficiently operate the traditional batch SSC because of the intersecting solubility lines and hence the temperature dependence of polymorph stability. From a thermodynamic perspective, the transition temperature in a batch crystallization is the minimum final temperature for the polymorph that is stable at high temperature, and it is the maximum initial temperature for the polymorph that is stable at lower temperatures. The existence of a transition point between the two polymorphs often makes it difficult to produce consistently one or the other form with good yield in a batch crystallization process. Due to the constant-temperature operation, continuous tank crystallizers could overcome this problem, but the scale of production and other technology challenges often does not justify their application. This paper proposes a semibatch cooling SSC strategy, having as the manipulated variable the feed flow rate of a high-temperature, concentrated inlet stream in the same solvent system as used in the crystallization process. The crystallizer temperature is fixed under the transition temperature, and the concentration corresponding to the supersaturation set point is undersaturated for the counter polymorph, ensuring in this way thermodynamic polymorph selection. The system is presented through the case study of p-aminobenzoic acid (PABA) crystallization from ethanol for SSC of both enantiotropic polymorphs: alpha-PABA can be obtained in both batch and semibatch operation. According to the literature, beta-PABA cannot be easily obtained in batch cooling crystallization, but the semibatch setup was able to produce it consistently without yield limitations due to the transition temperature.

Novel semibatch supersaturation control approach for the cooling crystallization of heat-sensitive materials

Simulation and Experimental Investigation of a Novel Supersaturation Feedback Control Strategy for Cooling Crystallization in Semi-Batch Implementation

Thermodynamic Polymorph Selection in Enantiotropic Systems Using Supersaturation-Controlled Batch and Semibatch Cooling Crystallization

Non-Isothermal Crystallization of Aqueous Nanofluids with High Aspect-Ratio Carbon Nano-Additives for Cold Thermal Energy Storage

Supersaturation Tracking for the Development, Optimization and Control of Crystallization Processes

Closed-loop Control of Crystal Shape in Seeded Cooling Crystallisation Experiments

Use of Wet Milling Combined with Temperature Cycling to Minimize Crystal Agglomeration in a Sequential Antisolvent-Cooling Crystallization

Batch Cooling Crystallization in Non-Isothermal Taylor Vortex Flow: Effective Method for Controlling Crystal Size Distribution

Multiscale Modeling and Simulation of Polymer Crystallization in Cooling Stage

Membrane-Assisted Cooling Crystallization for Interfacial Nucleation Induction and Self-Seeding Control

Process Intensification and Control Strategies in Cooling Crystallization: Crystal Size and Morphology Optimization of Α-Paba

Visualizing the crystallization of sodium chloride under supersaturated condition

Control of crystal morphology through supersaturation ratio and mixing conditions

Effect of Supersaturation on L-Glutamic Acid Polymorphs under Droplet-Based Microchannels

Solvent–Solvent Cooling Crystallization: an Effective Method to Control the Morphology and Size of Ammonium Perchlorate Crystals

Control of Crystal Size Distribution using Non-Isothermal Taylor Vortex Flow

Computational Fluid Dynamics Modeling of the Precipitation Process in a Semibatch Crystallizer

Optional Operation of Batch Crystallization

Membrane Assisted Cooling Crystallization: Process Model, Nucleation, Metastable Zone, and Crystal Size Distribution

Fluid Dynamic and Heat Transfer Simulations of Solid Hollow Fiber Cooling Crystallizer for Continuous Synthesis of Drug Nanoparticles

Control of Crystal Properties in a Mixed-Suspension Mixed-Product Removal Crystallizer: General Methods and the Effects of Secondary Nucleation