Abstract:Multilevel inverters with improved voltage quality are widely used in applications such as motor control and electric vehicles. The four-level active neutral point clamped (4L-ANPC) inverter effectively meets the demands for high power density and low device voltage stress. However, balancing the capacitor voltage and reducing its low-frequency voltage fluctuation are critical challenges that need to be addressed. To address these challenges, this paper proposes a "variable reference + zero-sequence injection" method that requires only three reference voltage signals to determine the injected zero-sequence components. Particularly, the expression of the midpoint current, regarding the modulation index and phase current amplitude, is theoretically derived. This reveals the fundamental connection between the zero-sequence voltage signal and the midpoint current, providing a theoretical foundation for the zero-sequence injection method in four-level inverters. Subsequently, a simulation model and an experimental platform of the 4L-ANPC inverter were developed to compare and analyze the waveforms of the upper and lower capacitor voltages, phase currents, and line voltages under different modulation methods. Additionally, the upper and lower capacitor voltage waveforms were examined for various modulation indices. The results indicate that as the modulation index increases, the low-frequency voltage fluctuation in the upper and lower capacitor voltages also rises. At a modulation index of 0.95, the "variable reference + zero-sequence injection" method effectively suppresses the fluctuation in the upper and lower capacitor voltages to be no more than 1 V. These experimental findings validate the effectiveness of the proposed method.

Inverter Control Based on Virtual Impedance under Unbalanced Load.

Control of Distributed Power Inverter with Unbalanced and Nonlinear Loads

Modeling and Control of Three-Phase Inverter Powering Unbalanced and Nonlinear Loads

Study on a Novel Control Strategy of Three-Phase Inverter under Unbalanced Load

Control Methods to Improve Virtual Power Angle Transient Stability of Droop-Controlled Inverters

Parallel Operation of Three-Phase Inverters with Virtual Oscillator and Multi-Resonant Control.

A Wireless Parallel Control Method of Inverters with Connection Impedance Differences Being Taken into Account

Research on Virtual Impedance Control of Parallel Three-phase Inverter System

A Virtual Synchronous Generator-Based Control Strategy and Pre-Synchronization Method for a Four-Leg Inverter under Unbalanced Loads

Application of Virtual Synchronous Generator Technology in Three-Phase Four-Leg Inverter

Modeling and Research of Three-Phase Inverter Powering Nonlinear Load

Modeling and Triple-Loop Control of ZVS Grid-Connected DC/AC Converters for Three-Phase Balanced Microinverter Application

Analysis Of Dc-Link Current Of Parallel Three-Phase Inverters Under Unbalanced Output Currents

Impedance Modeling and Stability Analysis of Three-Phase Four-Leg Grid-Connected Inverter Considering Zero-Sequence

An Unbalanced Voltage Compensation Method for Parallel Inverters in Microgrids

Third-Harmonic Injection PWM Based Control Strategy for A Five-Phase Six-Leg Voltage Source Inverter With Unbalanced Loads

A Novel Hybrid Pulse Train Control Strategy to Mitigate Voltage Unbalance Rate in Stand-alone Four-leg Voltage Source Inverter System

Simple Voltage Balancing Control of Four-Level Inverter

Voltage Balancing Control of a Three-Phase Hybrid-Clamped Five-Level Inverter Based on Optimal Zero-Sequence Voltage Injection

Characteristics Analysis and Control Strategy of Inverter Combined with Cascading and Paralleling

Voltage Balancing Control of a Four-Level Hybrid-Clamped Converter Based on Zero-Sequence Voltage Injection Using Phase-Shifted PWM