Abstract:Multilevel inverters with improved voltage quality are widely used in applications such as motor control and electric vehicles. The four-level active neutral point clamped (4L-ANPC) inverter effectively meets the demands for high power density and low device voltage stress. However, balancing the capacitor voltage and reducing its low-frequency voltage fluctuation are critical challenges that need to be addressed. To address these challenges, this paper proposes a "variable reference + zero-sequence injection" method that requires only three reference voltage signals to determine the injected zero-sequence components. Particularly, the expression of the midpoint current, regarding the modulation index and phase current amplitude, is theoretically derived. This reveals the fundamental connection between the zero-sequence voltage signal and the midpoint current, providing a theoretical foundation for the zero-sequence injection method in four-level inverters. Subsequently, a simulation model and an experimental platform of the 4L-ANPC inverter were developed to compare and analyze the waveforms of the upper and lower capacitor voltages, phase currents, and line voltages under different modulation methods. Additionally, the upper and lower capacitor voltage waveforms were examined for various modulation indices. The results indicate that as the modulation index increases, the low-frequency voltage fluctuation in the upper and lower capacitor voltages also rises. At a modulation index of 0.95, the "variable reference + zero-sequence injection" method effectively suppresses the fluctuation in the upper and lower capacitor voltages to be no more than 1 V. These experimental findings validate the effectiveness of the proposed method.

Voltage Balancing Control of a Three-Phase Hybrid-Clamped Five-Level Inverter Based on Optimal Zero-Sequence Voltage Injection

Voltage Balancing Control of a Four-Level Hybrid-Clamped Converter Based on Zero-Sequence Voltage Injection Using Phase-Shifted PWM

Two Variations of Five-Level Hybrid-Clamped Converters and Their Voltage Balancing Control Using Three Degrees of Freedom

Evaluation of Capacitor Voltage Balancing Control Strategies for Multilevel DAB Converters

A Capacitor Voltage Balancing Strategy for a Five-Level Hybrid-Clamped Inverter

Capacitor Voltage Balancing of a New Five-Level Hybrid-Clamped Inverter

The Topologies and Control of Hybrid-Clamped Four-Level and Five-Level Inverters

Voltage Balancing Control of a Four-Level Hybrid-Clamped Inverter Using Modified Phase-Shifted PWM

Topology and Control of a Five-Level Hybrid-Clamped Converter for Medium-Voltage High-Power Conversions

Multi-Objective Optimization Control of A Four-Level Hybrid-Clamped Inverter

Investigation of Advanced Control Strategies for Hybrid Multilevel Inverter

Capacitor Voltage Balancing Control for a Novel 5-Level Dual Active Bridge Converter

Simple Voltage Balancing Control of Four-Level Inverter

Novel Control Scheme of Three-Phase Six-Level Hybrid Flying-Capacitor Inverters With Self-Balancing Capability

Multi-purpose Optimal Control Strategy of a Five-Level Active Neutral-Point Clamped Inverter Based on Zero-Sequence Voltage Injection

Imbalance Mechanism and Balanced Control of Capacitor Voltage for a Hybrid Modular Multilevel Converter

Capacitor Voltage Balancing Algorithm with Redundant Level Modulation for a Five Level Converter with Reduced Device Count

A new voltage-balancing controller in cascaded multilevel converters

Research of capacitor voltage balance control method for H-bridge inverter of hybrid 9-level inverter

Control Strategy of Neutral-point Potential Balancing in Three-level Inverter

A Three-Phase Five-Level Inverter With High DC Voltage Utilization and Self-Balancing Capacity of Floating Capacitor