Abstract:Multilevel inverters with improved voltage quality are widely used in applications such as motor control and electric vehicles. The four-level active neutral point clamped (4L-ANPC) inverter effectively meets the demands for high power density and low device voltage stress. However, balancing the capacitor voltage and reducing its low-frequency voltage fluctuation are critical challenges that need to be addressed. To address these challenges, this paper proposes a "variable reference + zero-sequence injection" method that requires only three reference voltage signals to determine the injected zero-sequence components. Particularly, the expression of the midpoint current, regarding the modulation index and phase current amplitude, is theoretically derived. This reveals the fundamental connection between the zero-sequence voltage signal and the midpoint current, providing a theoretical foundation for the zero-sequence injection method in four-level inverters. Subsequently, a simulation model and an experimental platform of the 4L-ANPC inverter were developed to compare and analyze the waveforms of the upper and lower capacitor voltages, phase currents, and line voltages under different modulation methods. Additionally, the upper and lower capacitor voltage waveforms were examined for various modulation indices. The results indicate that as the modulation index increases, the low-frequency voltage fluctuation in the upper and lower capacitor voltages also rises. At a modulation index of 0.95, the "variable reference + zero-sequence injection" method effectively suppresses the fluctuation in the upper and lower capacitor voltages to be no more than 1 V. These experimental findings validate the effectiveness of the proposed method.

Voltage Balancing Control of a Four-Level Hybrid-Clamped Inverter Using Modified Phase-Shifted PWM

Voltage Balancing Control of a Four-Level Hybrid-Clamped Converter Based on Zero-Sequence Voltage Injection Using Phase-Shifted PWM

A Capacitor Voltage Balancing Strategy for a Five-Level Hybrid-Clamped Inverter

Capacitor Voltage Balancing of a New Five-Level Hybrid-Clamped Inverter

Voltage Balancing Control of a Three-Phase Hybrid-Clamped Five-Level Inverter Based on Optimal Zero-Sequence Voltage Injection

Two Variations of Five-Level Hybrid-Clamped Converters and Their Voltage Balancing Control Using Three Degrees of Freedom

A Novel Voltage Balancing Strategy for Four-Level Hybrid-Clamped Converters Under Selective Harmonic Elimination PWM

A Four-level Hybrid-Clamped Converter with Natural Capacitor Voltage Balancing Ability

Multi-Objective Optimization Control of A Four-Level Hybrid-Clamped Inverter

The Topologies and Control of Hybrid-Clamped Four-Level and Five-Level Inverters

Hybrid Voltage Balancing Control for Four-Level Hybrid-Clamped Converters with Low Switching Frequency

Imbalance Mechanism and Balanced Control of Capacitor Voltage for a Hybrid Modular Multilevel Converter

SHE-PWM Control for A Four-level Hybrid-Clamped Inverter

A New Five-Level Hybrid-Clamped Converter with Reduced Number of Clamping Devices

Simple Voltage Balancing Control of Four-Level Inverter

A New Modulation Method for a Five-Level Hybrid-Clamped Inverter with Reduced Flying Capacitor Size

Research of capacitor voltage balance control method for H-bridge inverter of hybrid 9-level inverter

Capacitor Voltage Balancing Algorithm with Redundant Level Modulation for a Five Level Converter with Reduced Device Count

Pwm and Capacitor Voltage Balance Control Strategies for Hybrid 9-Level Inverter

Topology and Control of a Five-Level Hybrid-Clamped Converter for Medium-Voltage High-Power Conversions

Voltage and Current Balancing Control for 48-V Two-Stage Hybrid-Switched-Capacitor Converter