Abstract:Granites are inevitably subjected to the effects of repeated water quenching in the process of geothermal energy exploitation. To gain a greater understanding of the mechanical responses and cracking mechanisms of granites affected by quenching cycling, conventional triaxial compression tests were conducted involving granite samples after high temperature treatment (150–750 °C) with multiple water quenching cycles (1–15). The findings indicated that, when the heating temperature values or quenching cycles increase, both the longitudinal wave velocity and bulk density declined, while both the mass loss and volume increase rates were enhanced. The peak intensity of diffraction for quartz exhibited a reduction of 61.38% and 27.25%, respectively. Gradually enhanced thermal damage against the increase in temperature values or quenching cycles resulted in a loose matrix structure within the granite samples with complicated crack networks. With increasing number of cycles, the peak strength exhibited a negative linear decrease, and the reduction in peak strength with increasing temperature could be divided into two stages, with a threshold temperature value of 450 °C, while the peak axial strain experienced an exponential increasing trend. Both the elastic and secant moduli decreased with the temperature and number of cycles due to primary thermal damage accumulation in the granite, and the post peak rock brittleness weakened. As the temperature levels and quenching cycles were increased, the cohesion respectively decreased by 44.12–56.99% and 27.07–36.55%, due to the weakened bonding force between mineral grains, while the Poisson's ratio increased. Defining the crack damage stress (maximum volumetric strain) as the initial yield position, variations in the plastic shear strain and subsequent strength characteristics were analysed. Both the subsequent cohesion and internal friction angle increased with the plastic shear strain but decreased with both the temperature and number of cycles. At a low temperature level, typical oblique or V-shaped shear cracks, traversing the whole sample height, resulted in ultimate sample failure, while at a larger temperature level or a larger number of cycles, the sample was characterized by progressive failure of the loose matrix structure generated by 3D crack networks, rather than large penetrating macro cracks.

Deformation Characteristics of Granites at Different Unloading Rates after High-Temperature Treatment

Uniaxial Compressive Behavior of Granite at High Strain Rates

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Investigating the effect of water quenching cycles on mechanical behaviors for granites after conventional triaxial compression

Experimental investigation on mechanical behaviors of Nanan granite after thermal treatment under conventional triaxial compression

Effect of confining pressure on deformation and strength of granite in confined direct tension tests

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

DEFORMATION AND FAILURE CHARACTERISTICS OF GRANITE UNDER UNIAXIAL COMPRESSION AFTER HIGH TEMPERATURE

Tensile Properties and Damage Evolution Laws of Granite After High- and Low-Temperature Cycles

Mechanical properties of granite at high temperature subjected to true triaxial compression

Investigations of the Progressive Damage and Failure Behaviors of Thermally Treated Granite Under the Coupling Action of Biaxial Stress Constraint and High Strain Rate

Damage Characteristics of Granite Under Hydraulic and Cyclic Loading–Unloading Coupling Condition

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

Influence of temperature and confining pressure on the mechanical properties of granite

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Failure behaviors of fractured granite during loading and unloading under high confining pressure based on acoustic emission multi-parameter analysis

Research on the Macroscopic and Microscopic Failure Mechanisms and Damage Deterioration Patterns of Granite under Unloading Paths

Mechanical Behavior of a Granite from Wuyi Mountain: Insights from Strain-Based Approaches

Dynamic response and fracture characteristics of thermally-treated granite under dynamic loading

Experimental Study on Damage and Fracture Characteristics of Beishan Granite Subjected to High-temperature Treatment with DIC and AE Techniques