Abstract:We proposed a fiber taper based on the Fabry-Perot (FP) interferometer structure with controllable temperature sensitivity. The FP interferometer is formed by inserting a segment of tapered fiber tip into the capillary and subsequently splicing the other end of the capillary to a single-mode fiber (SMF), the tapered fiber endface, and the spliced face form the FP cavity. Through controlling the inserted tapered fiber length, a series of FP interferometers were made. Because the inserted taper tip has the degree of freedom along the fiber axial, when the FP interferometer is subjected to temperature variation, the thermal expansion of the fiber taper tip will resist the FP cavity length change caused by the evolution of capillary length, and we can control the temperature sensitivity by adjusting the inserted taper length. In this structure, the equivalent thermal expansion coefficient of the FP interferometer can be defined; it was used to evaluate the temperature sensitivity of the FP interferometer, which provides an effective method to eliminate the temperature effect and to enhance other measurement accuracy. We fabricated the FP interferometers and calibrated their temperature characters by measuring the wavelength shift of the resonance dips in the reflection spectrum. In a temperature range of 50 degrees C to 150 degrees C, the corresponding temperature sensitivities can be controlled between 0 and 1.97 pm/degrees C when the inserted taper is between 75 and 160 mu m. Because of its controllable temperature sensitivity, ease of fabrication, and low cost, this FP interferometer can meet different temperature sensitivity requirements in various application areas, especially in the fields which need temperature insensitivity. (C) 2015 Optical Society of America

Fiber Tip Thermometer

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

Fiber tip high temperature sensor

Fiber Fabry-Perot Interferometer with Controllable Temperature Sensitivity

Miniature ⊓-Shaped Polymer Fiber Tip for Simultaneous Measurement of the Liquid Refractive Index and Temperature with High Sensitivities

Chirped Fiber Tip Fabry-Perot Interferometer.

Multimode fiber Fabry-Perot interferometer tip sensor

Compact fiber tip modal interferometer for high-temperature and transverse load measurements.

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

AN ULTRA-COMPACT AND REPRODUCIBLE FIBER TIP MICHELSON INTERFEROMETER FOR HIGH-TEMPERATURE SENSING (Invited)

Fiber-optic sensor tip for measuring temperature and liquid refractive index

Fabry–Perot interferometer fiber tip sensor based on a glass microsphere glued at the etched end of multimode fiber

Miniaturized fiber taper reflective interferometer for high temperature measurement.

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

An Optical Fiber Tip Micrograting Thermometer

Dual Self-Growing Polymer Microtips on A Multicore Fiber for Humidity and Temperature Discriminative Sensing

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

Preparation and Performance of a Fiber Optic Temperature Sensor with Multiple Fluorescence Mechanisms