Abstract:The carbon material prepared by co-pyrolysis of biochar and caking coal has been proved that it acts in catalytic conversion of volatiles and could be used in a granular bed duster as filter medium due to its high abrasive resistance in the coal pyrolysis technology. In this work, inactive carbon material loaded by nickel (Ni/ICM) was prepared by pyrolysis of the blend of biochar ion exchanged with nickel and caking coal, and then was steam activated obtaining activated carbon material loaded by nickel (Ni/ACM). The study investigated the in-situ catalytic conversion process of coal pyrolysis volatiles over Ni/ICM and Ni/ACM in a continuous pyrolysis downer-bed reactor. The physical and chemical properties of Ni/ICM and Ni/ACM, pyrolysis product distribution and the component of tar were analyzed, especially, the coke suspended in tar (Coke-S) was separated from tar and characterized in detail. Results show that the crystallite size of Ni and NiO in Ni/ICM is about 5-7 nm, and that is slightly larger in Ni/ACM. Compared to Ni/ICM, more nickel species, pores, acid sites, oxygen-containing functional groups and carbon defects are contained in Ni/ACM. The yields of tar and light tar (boiling point below 360 o C) are higher over Ni/ICM than over Ni/ACM. Ni/ICM further improves the tar quality compared to ICM, and the content of light oil in tar increases from 22.0 wt.% over ICM to 30.6 wt.% over Ni 3.2 /ICM. The highest light oil yield is obtained over Ni 1.9 /ICM as 3.6 wt.% and the lowest pitch yield is obtained over Ni 3.2 /ICM as 3.5 wt.%. The characterization of Coke-S shows that it is composed of large aromatic clusters crosslinked by oxygen and fine ash particles. The large aromatic clusters, as heavy component in tar, are found that its H/C molar ratio increases and condensation degree decreases over Ni/ICM and Ni/ACM in comparison with ICM and ACM, respectively, which also means that the quality of tar is improved. Besides, the oxygen in the tar may have been transferred to the coke.

RETRACTED: Pore Size Control of Pitch-based Activated Carbon Fibers by Pyrolytic Deposition of Propylene

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Crucial Size Effect on Dicarbonylation of Acetylene over Pd/CsHPMo Heterogeneous Catalysts

Porosity and surface chemistry properties of carbon blacks from pyrolysis of used tires in a pilot-scale rotary kiln

Preparation of Pitch-based Activated Carbon Fibers and Their Catalytic Oxidation Performance for NO

Preparation of micro-porous monolithic activated carbon from anthracite coal using coal tar pitch as binder

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Preparation and characterization of pitch coke from oxidized polymerized pitch

Homogeneous-pore-creation in pitch-based carbon fibers by extraction-activation and their application as supports for catalytic hydrogenation

Surface area and pore size distribution of microporous carbon fibers prepared by electrochemical oxidation

High Catalytic Performance and Stability of Pt/C Using Acetic Acid Functionalized Carbon

Nickel Loaded on Carbon Materials Prepared From Co-pyrolysis of Biochar and Caking Coal for Catalytic Conversion of Volatiles

Effect of beating degree of fiber on the development of porosity in polyacrylonitrile-based activated carbon fiber paper

Insight into the Pyrolysis Behaviors of Petroleum-Driven Mesophase Pitch via ReaxFF Molecular Dynamics and In Situ TG-FTIR/MS

Study on Carbon Nanotubes of Pyrolysis Carbons P for In Situ Catalytic Formation on Expanded Graphite Surface

Effects of co-carbonization of medium and low temperature refined pitch and high temperature refined pitch on the structure and properties of needle coke

Pitch-Derived Activated Carbon Fibers for Emission Control of Low-Concentration Hydrocarbon

Petroleum pitch-derived porous carbon as a metal-free catalyst for direct propane dehydrogenation to propylene

Surface character of pyrolytic carbon black

Optimizing the Micro/Mesoporous Structure of Hierarchical Porous Carbon Synthesized from Petroleum Pitch Using the Solvent-Free Method for Ultra-Fast Capacitive Deionization

De-agglomeration and homogenisation of nanoparticles in coal tar pitch-based carbon materials