Abstract:<p>Environmental problems caused by waste tires have become so glaring that it has attracted wide attention. This case study seeks to examine the properties of carbon black from waste tires continuous commercial scale pyrolysis. This work aims to contribute to this growing area of research by exploring the difference between the properties of products under the condition of mass production and those under the condition of laboratory scale or pilot scale production. A pyrolysis prototype, with a waste tire mass flow rate of 50–60 t d<sup>−1</sup> was constructed and introduced. Steel-included tire granulates were pyrolyzed in micro-negative pressure furnace at about 420 ± 20 °C. This kind of nonstripping, micro-negative pressure and low-temperature continuous thermal pyrolysis technology can reduce the stripping process between rubber and steel wire, reduce the requirement of equipment sealing, and improve the utilization rate of resources. All three products including pyrolytic carbon black (CBp), tire pyrolysis oil (TPO) and pyrolysis gas showed good characteristics. Pyrolysis gas had been successfully re-used for pyrolysis furnaces and dryers. The higher heating value of TPO estimated to 37–40 MJ/ kg, which was comparable to diesel fuel through further treatment. Results of proximate analysis, element analysis, XPS, FTIR, XRD and surface structure confirmed that CBp with commercial scale production showed no apparent data difference with those in other small scale research cases. The morphological changes of carbon black particles were suggested, revealing a possible internal structure of CBp aggregates in commercial scale pyrolysis. This study is an attempt to push the existing research in this field to commercial production. This work generates fresh insight into the viability of continuous commercial pyrolysis and demonstrates the feasibility of the operation, providing reference for many researchers and units who study the pyrolysis technology of waste tires with the feasibility of industrial production.</p>

Porosity and surface chemistry properties of carbon blacks from pyrolysis of used tires in a pilot-scale rotary kiln

XPS Analysis of Surface Component of Carbon Blacks from Pyrolysis of Used Tires in Pilot-Scale Rotary Kiln

Investigation of Reinforcement of the Modified Carbon Black from Wasted Tires by Nuclear Magnetic Resonance

Surface Modification of Pyrolytic Carbon Black from Waste Tires and Its Use As Pigment for Offset Printing Ink

Chemical structure of C in carbon blacks from pyrolysis of used tires in pilot-scale rotary kiln

Surface Characteristics of Carbon Black Produced by Pyrolysis of Used Tires

Adsorption-catalytic Mechanism for Pyrolytic Carbon Black from Waste Tires on Cr(Ⅵ) in Aqueous Solution

Influence of Pyrolytic Carbon Black Derived from Waste Tires at Varied Temperatures within an Industrial Continuous Rotating Moving Bed System

A Comparison of Surface Morphology and Chemistry of Pyrolytic Carbon Blacks with Commercial Carbon Blacks

Surface character of pyrolytic carbon black

INTENSIFICATION OF ADSORPTION PROCESS BY USING THE PYROLYTIC CHAR FROM WASTE TIRES TO REMOVE CHROMIUM(VI) FROM WASTEWATER

Properties of Pyrolytic Chars and Activated Carbons Derived from Pilot-Scale Pyrolysis of Used Tires

CHARACTERISTIC AND APPLICATION OF PYROLYTIC CHAR DERIVED FROM PILOT SCALE PYROLYSIS OF SCRAP TYRES

Characteristic of heavy metal ions adsorption by carbon blacks from pyrolysis of used tires in pilot-scale rotary kiln

Demineralization strategies of carbon black derived from pyrolysis of waste tires

Activation of pyrolytic chars derived from used tires

Recovery of carbon black from waste tire in continuous commercial rotary kiln pyrolysis reactor

Separation of Core-Shell Structured Carbon Black Nanoparticles from Waste Tires by Light Pyrolysis

Surface properties of carbon black functionalized with pyrrole compounds

Effect of Demineralization on Waste Tire Pyrolysis Char Physical, Chemical Characteristics and Combustion Characteristics

Characteristics and Chemical Treatment of Carbon Black from Waste Tires Pyrolysis