Abstract:The paper investigates the effect of machine setting on breaking strength, breaking elongation, and pick-up percentage of sized yarn properties. The factors considered are concentration of size solution, squeezing pressure and counts of yarn, the aim to develop a regression model that shows the effect of factors on size pick-up percentage, breaking strength regain, and loss in breaking elongation. The experiment is conducted by using 16 Ne and 21 Ne of cotton yarn, 3 Bar and 5 Bar of squeezing pressure, and 1.9% and 6% of size concentration with maize starch as sizing agent. A factorial design with two factors and 5 replicants has been used to design the experiment and analyze the results. The result showed that a slight change in squeezing pressure and concentration significantly affects the pick-up percentage, breaking strength regain and breaking elongation loss while a change of yarn count would not have a significant effect on the pick-up percentage of sized yarn. Furthermore, for achieving optimum properties of the sized yarn the pressure of squeezing, the count of the yarn and the concentration of the solution should be adjusted, and a regression model is developed to investigate the properties of the sized yarn by considering considered factors. 研究了棉纱上浆过程中机器设置对浆纱断裂强力、断裂伸长率和上浆纱性能的影响. 本研究考虑的因素是浆料浓度、挤压压力和纱线支数. 本研究旨在建立一个回归模型,显示使用不同支数的纱线、挤压压力、浆料浓度对浆料的上浆率、断裂强力回复率和断裂伸长率损失的影响. 实验在Else Addis Industrial PLC中进行,使用16 Ne和21 Ne的纱线支数,3巴和5巴的挤压压力,以及1.9%和6%的浆料浓度,使用玉米淀粉作为施胶剂. 采用两因素和5个重复因子的因子设计对实验进行设计并对结果进行分析. 分析结果表明,挤压压力和浆料浓度的微小变化对上浆纱的拾取率、断裂强力回复率和断裂伸长率损失有显著影响,而纱线支数的变化对上浆纱线的拾取率没有显著影响. 此外,为了获得上浆纱的最佳性能,应调整挤压压力、纱线数量和溶液浓度,并通过考虑因素建立回归模型来研究上浆纱的性能.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how machine settings affect the breaking strength, elongation at break and sizing percentage of sized yarn during the cotton yarn sizing process. Specifically, the author studied the effects of factors such as sizing agent concentration, squeezing pressure and yarn count on these performance indicators. Through these studies, the aim is to develop a regression model to quantify the specific effects of these factors on the performance of sized yarn, thereby optimizing the cotton yarn sizing process and improving yarn quality and production efficiency in the weaving process. ### Main research questions: 1. **Sizing agent concentration**: How do slurries of different concentrations affect the sizing percentage, breaking strength recovery rate and elongation at break loss of sized yarn? 2. **Squeezing pressure**: What are the effects of different squeezing pressures on the sizing percentage, breaking strength recovery rate and elongation at break loss of sized yarn? 3. **Yarn count**: How do the performance changes of yarns of different counts after sizing? 4. **Regression model**: How to predict and optimize the performance of sized yarn through the regression model? ### Research methods: - **Experimental design**: A two - factor five - repeat factorial design was adopted. The experimental parameters included yarn counts of 16 Ne and 21 Ne, squeezing pressures of 3 Bar and 5 Bar, and sizing agent concentrations of 1.9% and 6%. - **Experimental materials**: Corn starch was used as a sizing agent, and the experiment was carried out at Else Addis Industrial PLC. - **Testing methods**: The breaking strength, elongation at break and sizing percentage of sized yarn were measured by standard testing methods. ### Key findings: - **Squeezing pressure**: Slight changes in squeezing pressure have a significant impact on the sizing percentage, breaking strength recovery rate and elongation at break loss. - **Sizing agent concentration**: An increase in sizing agent concentration can improve the sizing percentage and breaking strength recovery rate, but an excessive concentration will lead to an increase in elongation at break loss. - **Yarn count**: Changes in yarn count have no significant impact on the sizing percentage, but have a certain impact on the breaking strength and elongation at break. ### Conclusion: By adjusting the squeezing pressure, sizing agent concentration and yarn count, the performance of sized yarn can be optimized, and the yarn quality and production efficiency in the weaving process can be improved. The study also developed a regression model for predicting and optimizing the performance of sized yarn, providing a scientific basis for actual production.

Enhancing Textile Cotton Yarn Sizing: Investigating Factors Impacting Breaking Strength, Pick-Up Percentage, and Elongation Loss

Determination of Factors Affecting the Quality of Sized Cotton Yarn Using Screening Experimental Method

Study on the Effect of Pre-Tension on Performance of Polyester/cotton/silk Sirofil Composite Yarn

Establishment and effectiveness of an evaluation method for load-bearing performance of cotton sized warp yarn

Further Studies of Mechanical Damage on Machine-Harvested Cotton Fiber via Coupling Effect of Moisture Regains and Low Temperature

The effect of size concentration, lubricant and plasticizer agents contents on cold sizing process performance of cotton warp yarns: modelling and optimization studies

Effect of Weft Yarn Type and Weaving Parameters on Surface Roughness and Drapeability of Woven Fabric

Effect Factors of the Wool/spandex Core-Spun Yarns Performances

Structure Damage on Cotton Fiber via Coupling Effect of Moisture Regains and Low Temperature

Tensile Properties of Cotton Yarn As Affected by Different Yarn Singeing Machine Variables

Comparing the cost-effectiveness and yarn quality improvement with PVA versus conventional maize starch as the sizing agents

Effect of Structural Changes on the Cotton Composite Yarn Properties

Computational modeling of the strength of staple yarn based on the random arrangement of fibers

Analyzing the Effect of Yarn Tension, Weft Yarn Type, and Weft Yarn Density on Thermal Resistance, Thermal Conductivity, and Air Permeability of Plain Woven Fabric

Test and Research on Reducing Yarn Forming Neps

Impact of Weft Yarn Structure and Fiber Type on Weft Yarn Velocity and Twist Loss in Air-Jet Weaving: A Critical Review

Preparation of carboxymethyl cellulose nanofibers and their application in warp size of textile

Development of sustainable dual core-spun yarns using several filaments and recycled cotton sourced from pre-consumer fabric waste

Quality and structural properties of gimp fancy yarns using the Design of Experiments

Effects of Cultivating Methods and Area on the Mechanical Properties of Cotton Fiber and Yarn

Transfer Law and Influence of Water Molecules in Cotton Fabric After Liquid-Ammonia Treatment