Structure Damage on Cotton Fiber via Coupling Effect of Moisture Regains and Low Temperature

Jiqiang Cao,Xiang Liu,Ruolian Mo,Hongling Liu,Hong Xu

DOI: https://doi.org/10.1080/15440478.2024.2338926

2024-04-12

Journal of Natural Fibers

Abstract:The most crucial variables that influence the characteristics and quality of cotton fibers during the cotton growth and ginning processes are temperature and moisture regains. Here the cotton fiber samples were generated with pre-treatment using a synergistic strategy of moisture regains and low temperatures, the morphology and structure of the fibers with different pre-treatments were analyzed by using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray Photoelectron Spectrometer (XPS), X-ray diffraction (XRD), and Carbon-13 Nuclear Magnetic Resonance Spectrometry (13C NMR). Further, the mechanical properties of the cotton fibers were evaluated using LLY-06E tensile. The results shown that, with 3 days of freezing in -18°C, the linear density variation of the cotton fiber samples reached maximum, and the surface of the fibers showed noticeable fractures, local holes, and folded damage. Moreover, the low temperature and high moisture regain caused the internal water molecules of the cotton fibers interact in complex ways, altering the intermolecular forces but without changing the chemical composition. This research expands the temperature field of cotton fibers, particularly in the ginning process, by investigating the damage to the mechanical characteristics of cotton fibers caused by the combined effect of low temperature and moisture regain. 在棉花生长和轧棉过程中,影响棉纤维特性和质量的最关键变量是温度和回潮率。在这里,使用回潮和低温的协同策略对棉纤维样品进行了预处理,并使用扫描电子显微镜(SEM)、傅立叶变换红外光谱(FTIR)、X 射线光电子能谱仪(XPS)、X 射线衍射(XRD)和碳 13 核磁共振谱(13CNMR)分析了经过不同预处理的纤维的形态和结构。此外,还使用 LLY-06E 拉伸法评估了棉纤维的机械性能。结果表明,在-18°C下冷冻 3 天后,棉纤维样品的线性密度变化达到最大值,纤维表面出现明显的断裂、局部孔洞和折叠损伤。此外,低温和高回潮导致棉纤维内部水分子发生复杂的相互作用,改变了分子间的作用力,但没有改变化学成分。这项研究通过研究低温和回潮共同作用对棉纤维机械特性造成的破坏,拓展了棉纤维的温度领域。

materials science, textiles

What problem does this paper attempt to address?

The paper primarily explores the impact of moisture regains and low temperatures on the structural damage of cotton fibers. Specifically, the study simulates extreme conditions encountered in actual production (such as low temperatures and high humidity) to investigate how these factors affect the physical properties and mechanical performance of cotton fibers.

The main findings of the paper include:

1. **Linear Density Changes**: After freezing at -18°C for 3 days, the linear density change of cotton fiber samples reached its maximum value. As moisture regains increased, the linear density of cotton fibers gradually increased, which is related to the porous structure of cotton fibers, as this structure can enhance hygroscopic performance.

2. **Microscopic Structural Changes**:
- Cotton fibers were analyzed using techniques such as Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), and Carbon-13 Nuclear Magnetic Resonance Spectroscopy (13C NMR).
- Under low temperature and high humidity conditions, significant cracks, local holes, and folding damage appeared on the surface of cotton fibers.
- Low temperature and high humidity led to complex interactions between water molecules inside the cotton fibers, thereby changing the intermolecular forces, although the chemical composition did not change.

3. **Changes in Crystallinity**: Analysis of X-ray diffraction patterns revealed that the crystalline form of cotton fibers still belonged to the typical cellulose I type. As the freezing time extended, the crystallinity of cotton fibers decreased, especially after freezing for 8 days, when the crystallinity was at its lowest.

4. **Changes in Microscopic Morphology**: Scanning electron microscopy results showed that the surface of cotton fibers exhibited varying degrees of damage under different pretreatment conditions, including cracks, local holes, and folding damage. These damages can weaken the strength of the fiber ring and increase the risk of breakage during processing.

In summary, this study aims to reveal the mechanism of mechanical performance damage of cotton fibers under the combined action of low temperature and moisture regains. This is of great significance for understanding the performance changes of cotton fibers under extreme environmental conditions and helps guide the cotton fiber treatment process in actual production.